From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefan Roese <sr@denx.de>
Date: Fri, 25 Apr 2008 14:45:38 +0200
Subject: [U-Boot-Users] pci memory booting on ppc460
In-Reply-To: <4811D15E.4080208@elkhashab.com>
References: <20080422205307.B644E24AB5@gemini.denx.de>
	<200804250813.56303.sr@denx.de> <4811D15E.4080208@elkhashab.com>
Message-ID: <200804251445.38814.sr@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Friday 25 April 2008, Ayman El-Khashab wrote:
> > Sounds quite reasonable. The only thing I'm unsure here is the size of
> > the PCI windows that is mapped upon PCI booting.
>
> Thanks for all your help ...
>
> I thought the answer to both questions was in footnote 3 on page 8 of
> the data sheet.  At least that was
> my interpretation of the following statement:  "3. When the optional
> boot from PCI Memory is selected, the
> PCI Boot ROM address space begins at 0000 000C FF00 0000 (16 MB)."

Ah, I didn't notice this.

> I interpreted that to mean the address was not something that needed to
> be configured in any sort of
> bar register and that the address it fetched was fixed.  So the only
> thing that was required was to
> configure the inbound translation on the bridge.

You could be right here.

Good luck with this PCI booting stuff. Please keep us informed on the 
progress.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================