[U-Boot-Users] [PATCH 2/2] Add the Harris QUAD100HD AMCC 405EP-based board.

[Wolfgang Denk <wd@denx.de>]

Hello Gary,

in message <20080425144001.0cdb8f4e@peedub.jennejohn.org> you wrote:
> 
> > > +#define CONFIG_IPADDR		192.168.1.67
> > > +#define CONFIG_SERVERIP		192.168.1.50
> > > +#define CONFIG_GATEWAYIP	192.168.1.1
> > > +#define CONFIG_NETMASK		255.255.255.0
> > > +#define CONFIG_ETHADDR 		00:01:02:03:04:05
> > > +#define CONFIG_ETH1ADDR		00:01:02:03:04:06
> > 
> > Are you really sure that you want to provide default MAC-addresses? We usually 
> > don't do this.
> 
> The customer had CONFIG_ETHADDR set in PPCBoot.  I added CONFIG_ETH1ADDR
> analog to that, since I have CONFIG_NET_MULTI defined in quad100hd.h.
> 
> I personally don't care either way and have no problem with removing them.
> Don't know what the customer would have to say about that.

Please remove this stuff from the board conig file. It has  no  place
there.  Not  to  mention that the used MAC addresses are owned by the
3Com corporation, and we have no permission to use these.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"There are some good people in it, but the orchestra as  a  whole  is
equivalent to a gang bent on destruction."      - John Cage, composer