[U-Boot-Users] [PATCH V2] Add the Harris QUAD100HD AMCC 405EP-based board.

[Stefan Roese <sr@denx.de>]

On Monday 28 April 2008, Gary Jennejohn wrote:
> > I would change the image size to 256k to safe some space in FLASH. For
> > this you have to change TEXT_BASE (in config.mk in your board directory)
> > to 0xfffc0000. And CFG_MONITOR_BASE too. Or even better:
> >
> > #define CFG_MONITOR_BASE        (TEXT_BASE)
>
> Well, I took these values from PPCBoot, as used by the customer, and I
> see no technical reason to change these values with which the customer
> is obviously satisfied.

The customer would "safe" 256k of FLASH memory this way. Perhaps the customer 
was/is not aware of this.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================