* [U-Boot-Users] [PATCH 2/2] Added support for Aztek Networks cta5000s telecom board.
2008-05-14 16:10 ` [U-Boot-Users] [PATCH 1/2] Added support for Aztek Networks cta5000s Jim Black
@ 2008-05-14 16:10 ` Jim Black
2008-05-14 18:54 ` Wolfgang Denk
2008-05-14 18:38 ` [U-Boot-Users] [PATCH 1/2] Added support for Aztek Networks cta5000s Stefan Roese
1 sibling, 1 reply; 5+ messages in thread
From: Jim Black @ 2008-05-14 16:10 UTC (permalink / raw)
To: u-boot
---
board/cta5000s/Makefile | 50 +++
board/cta5000s/config.mk | 30 ++
board/cta5000s/cta5000s.c | 575 +++++++++++++++++++++++++++++++++++
include/configs/cta5000s.h | 723 ++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 1378 insertions(+), 0 deletions(-)
create mode 100644 board/cta5000s/Makefile
create mode 100644 board/cta5000s/config.mk
create mode 100644 board/cta5000s/cta5000s.c
create mode 100644 include/configs/cta5000s.h
diff --git a/board/cta5000s/Makefile b/board/cta5000s/Makefile
new file mode 100644
index 0000000..be7e213
--- /dev/null
+++ b/board/cta5000s/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2001-2006
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/cta5000s/config.mk b/board/cta5000s/config.mk
new file mode 100644
index 0000000..5fca8c7
--- /dev/null
+++ b/board/cta5000s/config.mk
@@ -0,0 +1,30 @@
+#
+# (C) Copyright 2001-2005
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# Modified by, Yuli Barcohen, Arabella Software Ltd. <yuli@arabellasw.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# Rattler series boards by Analogue & Micro
+#
+
+TEXT_BASE = 0xFE000000
diff --git a/board/cta5000s/cta5000s.c b/board/cta5000s/cta5000s.c
new file mode 100644
index 0000000..0fe6da2
--- /dev/null
+++ b/board/cta5000s/cta5000s.c
@@ -0,0 +1,575 @@
+/*
+ *
+ * Aztek Networks CTA5000S board u-boot board support
+ *
+ * Copyright 2007 Aztek Networks, Inc.
+ *
+ * Authors: Scott Mann <smann@azteknetworks.net>
+ * jblack <jblack@azteknetworks.com>
+ *
+ * Based on: U-Boot configuration for Analogue&Micro Rattler boards.
+ * Copyright (C) 2004 Arabella Software Ltd.
+ * Yuli Barcohen <yuli@arabellasw.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ */
+
+#include <common.h>
+#include <mpc8260.h>
+#include <asm/cpm_8260.h>
+#include <ioports.h>
+#include <configs/cta5000s.h>
+
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#include <libfdt_env.h>
+#include <fdt_support.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define CFG_FCC1 (CONFIG_ETHER_INDEX == 1)
+
+/*
+ * I/O Port configuration table
+ *
+ * if conf is 1, then that port pin will be configured at boot time
+ * according to the five values podr/pdir/ppar/psor/pdat for that entry
+ */
+
+/* See include/configs/cta5000s.h for CFG_* settings
+ * All values in the following tables taken from
+ * chapter 6 of the cta Programmer's Guide
+ */
+
+/* table is used by cpu/mpc8260/cpu_init.c */
+const iop_conf_t iop_conf_tab[4][32] = {
+
+ /* Port A */
+ {/*conf ppar, psor, pdir, podr, pdat */
+ /* PA31 */ {CFG_FCC1, 1, 1, 0, 0, 0},
+ /* FCC1 MII COL */
+ /* PA30 */ {CFG_FCC1, 1, 1, 0, 0, 0},
+ /* FCC1 MII CRS */
+ /* PA29 */ {CFG_FCC1, 1, 1, 1, 0, 0},
+ /* FCC1 MII TX_ER */
+ /* PA28 */ {CFG_FCC1, 1, 1, 1, 0, 0},
+ /* FCC1 MII TX_EN */
+ /* PA27 */ {CFG_FCC1, 1, 1, 0, 0, 0},
+ /* FCC1 MII RX_DV */
+ /* PA26 */ {CFG_FCC1, 1, 1, 0, 0, 0},
+ /* FCC1 MII RX_ER */
+ /* PA25 */ {CFG_AZ_RY_BY, 0, 0, 0, 0, 0},
+ /* Rdy/Bsy flash */
+ /* PA24 */ {CFG_AZ_FPGA, 0, 0, 0, 1, 1},
+ /* FPGAINIT */
+ /* PA23 */ {CFG_AZ_FPGA, 0, 0, 1, 0, 1},
+ /* FPGAPROGRW */
+ /* PA22 */ {CFG_AZ_FPGA, 0, 0, 1, 0, 1},
+ /* FPGAPGM */
+ /* PA21 */ {CFG_FCC1, 1, 0, 1, 0, 0},
+ /* FCC1 MII TxD[3] */
+ /* PA20 */ {CFG_FCC1, 1, 0, 1, 0, 0},
+ /* FCC1 MII TxD[2] */
+ /* PA19 */ {CFG_FCC1, 1, 0, 1, 0, 0},
+ /* FCC1 MII TxD[1] */
+ /* PA18 */ {CFG_FCC1, 1, 0, 1, 0, 0},
+ /* FCC1 MII TxD[0] */
+ /* PA17 */ {CFG_FCC1, 1, 0, 0, 0, 0},
+ /* FCC1 MII RxD[0] */
+ /* PA16 */ {CFG_FCC1, 1, 0, 0, 0, 0},
+ /* FCC1 MII RxD[1] */
+ /* PA15 */ {CFG_FCC1, 1, 0, 0, 0, 0},
+ /* FCC1 MII RxD[2] */
+ /* PA14 */ {CFG_FCC1, 1, 0, 0, 0, 0},
+ /* FCC1 MII RxD[3] */
+ /* PA13 */ {CFG_AZ_PLL, 0, 0, 1, 0, 0},
+ /* PLLTIECLR */
+ /* PA12 */ {CFG_AZ_PLL, 0, 0, 1, 0, 1},
+ /* PLLSEL1 */
+ /* PA11 */ {CFG_AZ_PLL, 0, 0, 1, 0, 0},
+ /* PLLSEL0 */
+ /* PA10 */ {CFG_AZ_PLL, 0, 0, 1, 0, 0},
+ /* PLLTIEEN */
+ /* PA9 */ {CFG_AZ_FAN, 1, 0, 0, 0, 0},
+ /* FAN GOOD */
+ /* PA8 */ {CFG_AZ_FAN, 1, 0, 1, 0, 0},
+ /* FAN OFF */
+ /* PA7 */ {CFG_AZ_CF, 0, 0, 0, 0, 0},
+ /* CF car detect 1 */
+ /* PA6 */ {CFG_AZ_CF, 0, 0, 0, 0, 0},
+ /* CF car detect 2 */
+ /* PA5 */ {CFG_AZ_EXALM, 0, 0, 0, 0, 0},
+ /* Ext Alarm 0 */
+ /* PA4 */ {CFG_AZ_EXALM, 0, 0, 0, 0, 0},
+ /* Ext Alarm 1 */
+ /* PA3 */ {CFG_AZ_MCC2, 1, 0, 0, 0, 0},
+ /* CLK19 for MCC2 */
+ /* PA2 */ {CFG_AZ_MCC2, 1, 0, 0, 0, 0},
+ /* CLK20 for MCC2 */
+ /* PA1 */ {CFG_AZ_FPGA, 0, 0, 0, 0, 0},
+ /* FPGA busy */
+ /* PA0 */ {CFG_AZ_FPGA, 0, 0, 0, 0, 0}
+ /* FPGA done */
+ },
+
+ /* Port B */
+ { /*conf ppar, psor, pdir, podr, pdat */
+ /* PB31 */ {CFG_AZ_MCC2, 1, 1, 0, 0, 0},
+ /* MCC2 L1 TXDB2 */
+ /* PB30 */ {CFG_AZ_MCC2, 1, 1, 0, 0, 0},
+ /* MCC2 L1 RXDB2 */
+ /* PB29 */ {CFG_AZ_MCC2, 1, 1, 0, 0, 0},
+ /* MCC2 L1 RSYNCB2 */
+ /* PB28 */ {CFG_AZ_MCC2, 1, 1, 0, 0, 0},
+ /* MCC2 L1 TSYNCB2 */
+ /* PB27 */ {CFG_AZ_MCC2, 1, 1, 0, 0, 0},
+ /* MCC2 L1 TXDC2 */
+ /* PB26 */ {CFG_AZ_MCC2, 1, 1, 0, 0, 0},
+ /* MCC2 L1 RXDC2 */
+ /* PB25 */ {CFG_AZ_MCC2, 1, 1, 0, 0, 0},
+ /* MCC2 L1 TSYNCC2 */
+ /* PB24 */ {CFG_AZ_MCC2, 1, 1, 0, 0, 0},
+ /* MCC2 L1 RSYNCC2 */
+ /* PB23 */ {CFG_AZ_MCC2, 1, 1, 0, 0, 0},
+ /* MCC2 L1 TXDD2 */
+ /* PB22 */ {CFG_AZ_MCC2, 1, 1, 0, 0, 0},
+ /* MCC2 L1 RXDD2 */
+ /* PB21 */ {CFG_AZ_MCC2, 1, 1, 0, 0, 0},
+ /* MCC2 L1 TSYNCD2 */
+ /* PB20 */ {CFG_AZ_MCC2, 1, 1, 0, 0, 0},
+ /* MCC2 L1 RSYNCD2 */
+ /* PB19 */ {CFG_AZ_PLL, 0, 0, 1, 0, 0},
+ /* PLL RESET */
+ /* PB18 */ {CFG_AZ_PLL, 0, 0, 0, 0, 0},
+ /* PLL LOCK input */
+ /* PB17 */ {CFG_AZ_MCC2, 1, 1, 0, 0, 0},
+ /* CLK17 MCC2 */
+ /* PB16 */ {CFG_AZ_MCC2, 1, 1, 0, 0, 0},
+ /* CLK18 MCC2 */
+ /* PB15 */ {CFG_AZ_SCC2, 1, 0, 0, 0, 0},
+ /* SCC2 RXD */
+ /* PB14 */ {CFG_AZ_SCC3, 1, 0, 0, 0, 0},
+ /* SCC3 RXD */
+ /* PB13 */ {CFG_AZ_PLL, 0, 0, 0, 0, 0},
+ /* PLL Normal input */
+ /* PB12 */ {CFG_AZ_SCC2, 1, 1, 1, 0, 0},
+ /* SCC2 TXD */
+ /* PB11 */ {CFG_AZ_PLL, 0, 0, 0, 0, 0},
+ /* PLL Holdover */
+ /* PB10 */ {CFG_AZ_PLL, 0, 0, 0, 0, 0},
+ /* PLL Free run */
+ /* PB9 */ {CFG_AZ_PLL, 0, 0, 1, 0, 0},
+ /* PLL Fast Lock */
+ /* PB8 */ {CFG_AZ_SCC3, 1, 0, 1, 0, 0},
+ /* SCC3 TXD */
+ /* PB7 */ {CFG_AZ_MCC2, 1, 1, 0, 0, 0},
+ /* MCC2 L1 TXDA2 */
+ /* PB6 */ {CFG_AZ_MCC2, 1, 1, 0, 0, 0},
+ /* MCC2 L1 RXDA2 */
+ /* PB5 */ {CFG_AZ_MCC2, 1, 1, 0, 0, 0},
+ /* MCC2 L1 TSYNCA2 */
+ /* PB4 */ {CFG_AZ_MCC2, 1, 1, 0, 0, 0},
+ /* MCC2 L1 RSYNCA2 */
+ /* PB3 */ {CFG_AZ_NA, 0, 0, 0, 0, 0},
+ /* not available */
+ /* PB2 */ {CFG_AZ_NA, 0, 0, 0, 0, 0},
+ /* not available */
+ /* PB1 */ {CFG_AZ_NA, 0, 0, 0, 0, 0},
+ /* not available */
+ /* PB0 */ {CFG_AZ_NA, 0, 0, 0, 0, 0}
+ /* not available */
+ },
+
+ /* Port C */
+ { /*conf ppar, psor, pdir, podr, pdat */
+ /* PC31 */ {CFG_AZ_UN, 0, 0, 1, 0, 0},
+ /* unused */
+ /* PC30 */ {CFG_AZ_UN, 0, 0, 1, 0, 0},
+ /* unused */
+ /* PC29 */ {CFG_AZ_SCC2, 1, 0, 0, 0, 0},
+ /* CLK3 SCC2 */
+ /* PC28 */ {CFG_AZ_UN, 0, 0, 1, 0, 0},
+ /* unused */
+ /* PC27 */ {CFG_AZ_UN, 0, 0, 1, 0, 0},
+ /* unused */
+ /* PC26 */ {CFG_AZ_UN, 0, 0, 1, 0, 0},
+ /* unused */
+ /* PC25 */ {CFG_AZ_UN, 0, 0, 1, 0, 0},
+ /* unused */
+ /* PC24 */ {CFG_AZ_UN, 0, 0, 1, 0, 0},
+ /* unused */
+ /* PC23 */ {CFG_AZ_UN, 0, 0, 1, 0, 0},
+ /* unused */
+ /* PC22 */ {CFG_FCC1, 1, 0, 0, 0, 0},
+ /* TxClk (CLK10) */
+ /* PC21 */ {CFG_FCC1, 1, 0, 0, 0, 0},
+ /* RxClk (CLK11) */
+ /* PC20 */ {CFG_AZ_SCC2, 1, 0, 0, 0, 0},
+ /* CLK12 SCC2 */
+ /* PC19 */ {CFG_AZ_MCC2, 1, 0, 0, 0, 0},
+ /* CLK13 MCC2 */
+ /* PC18 */ {CFG_AZ_MCC2, 1, 0, 0, 0, 0},
+ /* TxClk (CLK14) */
+ /* PC17 */ {CFG_AZ_UN, 0, 0, 1, 0, 0},
+ /* unused */
+ /* PC16 */ {CFG_AZ_UN, 0, 0, 1, 0, 0},
+ /* unused */
+ /* PC15 */ {CFG_AZ_SCC1, 0, 0, 0, 0, 0},
+ /* CTS for SCC1 */
+ /* PC14 */ {CFG_AZ_UN, 0, 0, 1, 0, 0},
+ /* unused */
+ /* PC13 */ {CFG_AZ_FAN, 0, 0, 0, 0, 0},
+ /* FAN present */
+ /* PC12 */ {CFG_AZ_ESA, 0, 0, 0, 0, 0},
+ /* ESA Relay good */
+ /* PC11 */ {CFG_AZ_SCC3, 0, 0, 0, 0, 0},
+ /* CTS for SCC3 */
+ /* PC10 */ {CFG_AZ_SCC3, 0, 0, 0, 0, 0},
+ /* CD for SCC3 */
+ /* PC9 */ {CFG_AZ_SCC3, 0, 0, 0, 0, 0},
+ /* CI for SCC3 */
+ /* PC8 */ {CFG_AZ_SCC3, 0, 0, 0, 0, 0},
+ /* DSR for SCC3 */
+ /* PC7 */ {CFG_AZ_MDM, 0, 0, 1, 0, 0},
+ /* MDM Reset */
+ /* PC6 */ {CFG_AZ_MDM, 0, 0, 1, 0, 1},
+ /* MDM CTR */
+ /* PC5 */ {CFG_AZ_FAN, 0, 0, 1, 0, 1},
+ /* FAN EE CS */
+ /* PC4 */ {CFG_AZ_ESA, 1, 0, 0, 0, 0},
+ /* ESA On */
+ /* PC3 */ {CFG_AZ_UN, 0, 0, 1, 0, 0},
+ /* unused */
+ /* PC2 */ {CFG_AZ_ADC, 0, 0, 0, 0, 1},
+ /* ADC EOC IRQ */
+ /* PC1 */ {CFG_AZ_PLL, 0, 0, 1, 0, 0},
+ /* PLL MSEL1 */
+ /* PC0 */ {CFG_AZ_PLL, 0, 0, 1, 0, 0},
+ /* PLL MSEL0 */
+ },
+
+ /* Port D */
+ { /*conf ppar, psor, pdir, podr, pdat */
+ /* PD31 */ {CFG_AZ_SCC1, 1, 0, 0, 0, 0},
+ /* SCC1 RxD */
+ /* PD30 */ {CFG_AZ_SCC1, 1, 1, 1, 0, 0},
+ /* SCC1 TxD */
+ /* PD29 */ {CFG_AZ_UN, 0, 0, 1, 0, 0},
+ /* SCC1 RTSnot used */
+ /* PD28 */ {CFG_AZ_UN, 0, 0, 1, 0, 0},
+ /* unused */
+ /* PD27 */ {CFG_AZ_UN, 0, 0, 1, 0, 0},
+ /* unused */
+ /* PD26 */ {CFG_AZ_UN, 0, 0, 1, 0, 0},
+ /* unused */
+ /* PD25 */ {CFG_AZ_UN, 0, 0, 1, 0, 0},
+ /* unused */
+ /* PD24 */ {CFG_AZ_MEZZ, 0, 0, 0, 0, 0},
+ /* Mezz present */
+ /* PD23 */ {CFG_AZ_SCC3, 0, 0, 1, 0, 1},
+ /* RTS SCC3 */
+ /* PD22 */ {CFG_AZ_TSI, 0, 0, 1, 0, 0},
+ /* TSI reset */
+ /* PD21 */ {CFG_AZ_BP, 0, 0, 1, 0, 1},
+ /* BP EE CS */
+ /* PD20 */ {CFG_AZ_ADC, 0, 0, 1, 0, 1},
+ /* ADC SEL */
+ /* PD19 */ {CFG_AZ_UN, 0, 0, 1, 0, 1},
+ /* unused */
+ /* PD18 */ {CFG_AZ_SPI, 1, 1, 0, 0, 0},
+ /* SPI CLK */
+ /* PD17 */ {CFG_AZ_SPI, 1, 1, 0, 0, 0},
+ /* SPI MOSI */
+ /* PD16 */ {CFG_AZ_SPI, 1, 1, 0, 0, 0},
+ /* SPI MISO */
+ /* PD15 */ {CFG_AZ_UN, 0, 0, 1, 0, 0},
+ /* unused */
+ /* PD14 */ {CFG_AZ_UN, 0, 0, 1, 0, 0},
+ /* unused */
+ /* PD13 */ {CFG_AZ_UN, 0, 0, 1, 0, 0},
+ /* unused */
+ /* PD12 */ {CFG_AZ_UN, 0, 0, 1, 0, 1},
+ /* unused */
+ /* PD11 */ {CFG_AZ_UN, 0, 0, 1, 0, 0},
+ /* unused */
+ /* PD10 */ {CFG_AZ_UN, 0, 0, 1, 0, 0},
+ /* unused */
+ /* PD9 */ {CFG_AZ_SMC1, 1, 0, 1, 0, 0},
+ /* SMC1 TXD */
+ /* PD8 */ {CFG_AZ_SMC1, 1, 0, 0, 0, 0},
+ /* SMC1 RXD */
+ /* PD7 */ {CFG_AZ_UN, 0, 0, 1, 0, 0},
+ /* unused */
+ /* PD6 */ {CFG_AZ_UN, 0, 0, 1, 0, 0},
+ /* unused */
+ /* PD5 */ {CFG_AZ_UN, 0, 0, 1, 0, 0},
+ /* unused */
+ /* PD4 */ {CFG_AZ_FPGA, 0, 0, 1, 0, 1},
+ /* FPGA PGMCS */
+ /* PD3 */ {CFG_AZ_NA, 0, 0, 0, 0, 0},
+ /* not available */
+ /* PD2 */ {CFG_AZ_NA, 0, 0, 0, 0, 0},
+ /* not available */
+ /* PD1 */ {CFG_AZ_NA, 0, 0, 0, 0, 0},
+ /* not available */
+ /* PD0 */ {CFG_AZ_NA, 0, 0, 0, 0, 0}
+ /* not available */
+ }
+};
+
+uint cta_upm_table[] = {
+
+ /* Read single-beat (RSS) 0x00 */
+ CTA_UPM_READ_CYCLE_RAM_WORD_0,
+ CTA_UPM_READ_CYCLE_RAM_WORD_1,
+ CTA_UPM_READ_CYCLE_RAM_WORD_2,
+ CTA_UPM_READ_CYCLE_RAM_WORD_3,
+ CTA_UPM_READ_CYCLE_RAM_WORD_4,
+ CTA_UPM_READ_CYCLE_RAM_WORD_5,
+ CTA_UPM_READ_CYCLE_RAM_WORD_6,
+ CTA_UPM_READ_CYCLE_RAM_WORD_7,
+
+ /* Read burst (RBS) 0x08 */
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED,
+
+ /* 0x10 */
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED,
+
+ /* Write single-beat (WSS) 0x18 */
+ CTA_UPM_WRITE_CYCLE_RAM_WORD_0,
+ CTA_UPM_WRITE_CYCLE_RAM_WORD_1,
+ CTA_UPM_WRITE_CYCLE_RAM_WORD_2,
+ CTA_UPM_WRITE_CYCLE_RAM_WORD_3,
+ CTA_UPM_WRITE_CYCLE_RAM_WORD_4,
+ CTA_UPM_WRITE_CYCLE_RAM_WORD_5,
+ CTA_UPM_WRITE_CYCLE_RAM_WORD_6,
+ UNUSED,
+
+ /* Write burst (WBS) 0x20 */
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED,
+
+ /* Refresh timer (PTS) 0x30 */
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED,
+
+ /* Exception condition (EXS) 0x3C */
+ UNUSED,
+ UNUSED,
+ UNUSED,
+ UNUSED
+};
+
+long int initdram (int board_type)
+{
+ long int msize = CFG_SDRAM_SIZE;
+
+#ifndef CFG_RAMBOOT
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile memctl8260_t *memctl = &immap->im_memctl;
+ vu_char *ramaddr = (vu_char *) CFG_SDRAM_BASE;
+ uchar c = 0xFF;
+ uint psdmr = CFG_PSDMR;
+ int i;
+
+ immap->im_siu_conf.sc_ppc_acr = CFG_PPC_ACR;
+ immap->im_siu_conf.sc_ppc_alrh = CFG_PPC_ALRH;
+ immap->im_siu_conf.sc_tescr1 = CFG_TESCR1;
+ memctl->memc_mptpr = CFG_MPTPR;
+
+ /* Initialise 60x bus SDRAM */
+ memctl->memc_psrt = CFG_PSRT;
+ memctl->memc_or1 = CFG_OR1_PRELIM;
+ memctl->memc_br1 = CFG_BR1_PRELIM;
+ /* Precharge all banks */
+ memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
+ *ramaddr = c;
+ memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR; /* CBR refresh */
+ for (i = 0; i < 8; i++) {
+ *ramaddr = c;
+ }
+ /* Mode Register write */
+ memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;
+ *ramaddr = c;
+ memctl->memc_psdmr = psdmr | PSDMR_RFEN; /* Refresh enable */
+ *ramaddr = c;
+#endif /* !CFG_RAMBOOT */
+
+ /* Return total 60x bus SDRAM size */
+ return msize * 1024 * 1024;
+}
+
+int board_early_init_f (void)
+{
+
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile memctl8260_t *memctl = &immap->im_memctl;
+ uint table_size = sizeof (cta_upm_table) / sizeof (cta_upm_table[0]);
+
+ /* Aztek CTA clock configuration settings */
+
+ immap->im_siu_conf.sc_sypcr = CFG_SYPCR;
+ immap->im_siu_conf.sc_swsr = CFG_SWSR;
+ immap->im_siu_conf.sc_ppc_acr = (unsigned char)CFG_PPC_ACR;
+ immap->im_siu_conf.sc_ppc_alrh = CFG_PPC_ALRH;
+ immap->im_siu_conf.sc_ppc_alrl = CFG_PPC_ALRL;
+ immap->im_siu_conf.sc_lcl_acr = (unsigned char)CFG_LCL_ACR;
+ immap->im_siu_conf.sc_lcl_alrh = CFG_LCL_ALRH;
+ immap->im_siu_conf.sc_lcl_alrl = CFG_LCL_ALRL;
+ immap->im_siu_conf.sc_tescr1 = CFG_TESCR1;
+ immap->im_siu_conf.sc_tescr2 = CFG_TESCR2;
+ immap->im_siu_conf.sc_ltescr1 = CFG_LTESCR1;
+ immap->im_siu_conf.sc_ltescr2 = CFG_LTESCR2;
+ immap->im_siu_conf.sc_pdtea = CFG_PDTEA;
+ immap->im_siu_conf.sc_pdtem = (unsigned char)CFG_PDTEM;
+ immap->im_siu_conf.sc_ldtea = CFG_LDTEA;
+ immap->im_siu_conf.sc_ldtem = (unsigned char)CFG_LDTEM;
+
+ /* Aztek additional memory controller/upm settings */
+ memctl->memc_mamr = CFG_CTA_MAMR_PRELIM;
+ memctl->memc_mbmr = CFG_CTA_MBMR_PRELIM;
+ memctl->memc_mptpr = CFG_MPTPR;
+ memctl->memc_psdmr = CFG_PSDMR;
+ memctl->memc_psrt = CFG_PSRT;
+ memctl->memc_lsdmr = CFG_LSDMR;
+ memctl->memc_lsrt = CFG_LSRT;
+
+ upmconfig (UPMA, cta_upm_table, table_size);
+ upmconfig (UPMB, cta_upm_table, table_size);
+
+ return 0;
+}
+
+int checkboard (void)
+{
+ /* the fpga status pins on PORT A GPIO register */
+ uint status = 0;
+ uint *fpgaStatus = (uint *) 0xf0010d10;
+ int i = 100000;
+
+ /* wait until the init done pin is ready */
+ do {
+ if (!(FPGA_BUSY && *fpgaStatus))
+ i--;
+ if (i == 0)
+ break;
+
+ status = FPGA_DONE && *fpgaStatus;
+ } while (status == 0);
+
+ uchar *fpgaVersion = (uchar *) 0x2002001f;
+
+ printf ("Manuf: Aztek Networks, Inc.\n");
+ printf ("Board: CTA5000S\n");
+
+ if (i == 0)
+ printf ("FPGA: did not initialize\n");
+ else
+ printf ("FPGA: %d \n", *fpgaVersion);
+
+ return 0;
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
+/*
+ * update "memory" property in the blob
+ */
+void ft_blob_update (void *blob, bd_t * bd)
+{
+ int ret;
+
+ ret = fdt_fixup_memory (blob,
+ (u64) bd->bi_memstart, (u64) bd->bi_memsize);
+
+ if (ret < 0) {
+ printf ("ft_blob_update): cannot set /memory/reg "
+ "property err:%s\n", fdt_strerror (ret));
+ }
+
+}
+
+void ft_board_setup (void *blob, bd_t * bd)
+{
+ ft_cpu_setup (blob, bd);
+ ft_blob_update (blob, bd);
+}
+#endif
+/* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
+
+#if defined (CONFIG_STATUS_LED)
+
+int misc_init_r (void)
+{
+ __led_init (0, 0);
+ return 0;
+}
+
+void __led_toggle (led_id_t _msk)
+{
+
+ *((uchar *) (CFG_LED_BASE)) ^= (0x30);
+
+}
+
+void __led_init (led_id_t _msk, int st)
+{
+
+ *((uchar *) (CFG_LED_BASE)) = 0x20;
+}
+
+void __led_set (led_id_t _msk, int _st)
+{
+
+ if ((_st == STATUS_LED_ON))
+ *((uchar *) (CFG_LED_BASE)) |= 0x10;
+ else
+ *((uchar *) (CFG_LED_BASE)) &= ~(0x10);
+
+}
+#endif
diff --git a/include/configs/cta5000s.h b/include/configs/cta5000s.h
new file mode 100644
index 0000000..9b60038
--- /dev/null
+++ b/include/configs/cta5000s.h
@@ -0,0 +1,723 @@
+/*
+ *
+ * Aztek Networks CTA5000S board u-boot board support
+ *
+ * Copyright 2007 Aztek Networks, Inc.
+ *
+ * Authors: Scott Mann <smann@azteknetworks.net>
+ * jblack <jblack@azteknetworks.com>
+ *
+ * Based on: U-Boot configuration for Analogue&Micro Rattler boards.
+ * Copyright (C) 2004 Arabella Software Ltd.
+ * Yuli Barcohen <yuli@arabellasw.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_MPC8260 1
+#define CONFIG_CPM2 1 /* Has a CPM2 */
+#define CONFIG_CTA5000S 1
+#define CPU_ID_STR "MPC8250"
+
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_STATUS_LED /* Status LED enabled */
+#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */
+
+#define STATUS_LED_BIT 0x10
+#define STATUS_LED_PERIOD (CFG_HZ / 2)
+#define STATUS_LED_STATE STATUS_LED_BLINKING
+#define STATUS_LED_ACTIVE 1 /* LED on for bit == 0 */
+#define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
+
+#define CFG_LED_BASE 0x2002000E
+
+/* in Hz - this is actually the bus speed. CPU speed is determined by
+ * bus speed and multiplier (which is 2). Core speed is 132MHz and CPM
+ * is also 132MHz
+ */
+#ifndef CONFIG_8260_CLKIN
+#define CONFIG_8260_CLKIN 66000000
+#endif
+
+/*
+ * Flat Device Tree setup
+ */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+
+#define OF_CPU "PowerPC,8250 at 0"
+#define OF_SOC "soc at f0000000"
+#define OF_TBCLK (bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH "/soc/cpm/serial at 11a00"
+
+/*
+ * Debug Features
+ */
+/* remember to undef for prime time */
+#undef DEBUG
+/* Causes an infinite loop to run that allows time for attaching gdb */
+#undef CONFIG_GDB_ENTRY_POINT
+
+/* run the cta5000s init code from flash */
+/* look in include/common.h for more initialization options */
+#define CONFIG_BOARD_EARLY_INIT_F 1
+
+/* Allow serial number and MAC address (ethaddr) to be overwritten */
+#define CONFIG_ENV_OVERWRITE
+
+/*
+ * Select serial console configuration
+ *
+ * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
+ * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
+ * for SCC).
+ */
+#undef CONFIG_CONS_ON_SMC /* Console is not on SMC */
+#define CONFIG_CONS_ON_SCC /* Console is on SCC */
+#undef CONFIG_CONS_NONE /* It's not on external UART */
+#define CONFIG_CONS_INDEX 1 /* SCC1 is used for console */
+
+#define CONFIG_BAUDRATE 115200
+/*
+ * based on a 1.03MHZ BRG Input Clock
+ * 0.070% error on the low end, 0.536% error on the high end
+ */
+#define CFG_BAUDRATE_TABLE { 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*
+ * Select ethernet configuration
+ *
+ * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected,
+ * then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for
+ * SCC, 1-3 for FCC)
+ *
+ * If CONFIG_ETHER_NONE is defined, then either the ethernet routines
+ * must be defined elsewhere (as for the console), or CFG_CMD_NET must
+ * be removed from CONFIG_COMMANDS to remove support for networking.
+ */
+#undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */
+#define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */
+#undef CONFIG_ETHER_NONE /* No external Ethernet */
+
+#ifdef CONFIG_ETHER_ON_FCC
+
+#define CONFIG_ETHER_INDEX 1 /* FCC1 is used for Ethernet */
+
+#if (CONFIG_ETHER_INDEX == 1)
+
+/* - Rx clock is CLK11
+ * - Tx clock is CLK10
+ * - BDs/buffers on 60x bus
+ * - Full duplex
+ */
+#define CFG_CMXFCR_MASK (CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK)
+/*#define CFG_CMXFCR_VALUE (CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK10)*/
+#define CFG_CMXFCR_VALUE (CMXFCR_RF1CS_CLK10 | CMXFCR_TF1CS_CLK11)
+#define CFG_CPMFCR_RAMTYPE 0
+#define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
+
+#elif (CONFIG_ETHER_INDEX == 2)
+
+/* - Rx clock is CLK15
+ * - Tx clock is CLK14
+ * - BDs/buffers on 60x bus
+ * - Full duplex
+ */
+#define CFG_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+#define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK15 | CMXFCR_TF2CS_CLK14)
+#define CFG_CPMFCR_RAMTYPE 0
+#define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
+
+#endif /* CONFIG_ETHER_INDEX */
+
+#undef CONFIG_MII /* MII PHY management */
+#undef CONFIG_BITBANGMII /* Bit-banged MDIO interface */
+/*
+ * GPIO pins used for bit-banged MII communications
+ */
+#define MDIO_PORT 2 /* Port C */
+#define MDIO_ACTIVE (iop->pdir |= 0x00400000)
+#define MDIO_TRISTATE (iop->pdir &= ~0x00400000)
+#define MDIO_READ ((iop->pdat & 0x00400000) != 0)
+
+#define MDIO(bit) if(bit) iop->pdat |= 0x00400000; \
+ else iop->pdat &= ~0x00400000
+
+#define MDC(bit) if(bit) iop->pdat |= 0x00800000; \
+ else iop->pdat &= ~0x00800000
+
+#define MIIDELAY udelay(1)
+
+/*
+ * dont want gratuitous arp packets at power up to cause
+ * duplicate MAC issues in manufacturing
+*/
+#define CONFIG_ETHADDR 00:00:00:01:01:01
+#endif /* CONFIG_ETHER_ON_FCC */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+/*
+ * Supported Commands
+*/
+
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV /* ask for env variable */
+#define CONFIG_CMD_AUTOSCRIPT /* Autoscript Support */
+#define CONFIG_CMD_BDI /* bdinfo */
+#define CONFIG_CMD_BOOTD /* bootd */
+#define CONFIG_CMD_BSP /* Board Specific functions */
+#define CONFIG_CMD_CACHE /* icache, dcache */
+#define CONFIG_CMD_CONSOLE /* coninfo */
+#define CONFIG_CMD_DHCP /* DHCP Support */
+#undef CONFIG_CMD_DIAG /* Diagnostics */
+#define CONFIG_CMD_ECHO /* echo arguments */
+#undef CONFIG_CMD_EEPROM /* EEPROM read/write support */
+#define CONFIG_CMD_ENV /* saveenv */
+#undef CONFIG_CMD_EXT2 /* EXT2 Support */
+#undef CONFIG_CMD_FAT /* FAT support */
+#define CONFIG_CMD_FLASH /* flinfo, erase, protect */
+#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
+#undef CONFIG_CMD_I2C /* I2C serial bus support */
+#define CONFIG_CMD_IDE /* IDE harddisk support */
+#define CONFIG_CMD_IMI /* iminfo */
+#define CONFIG_CMD_IMLS /* List all found images */
+#define CONFIG_CMD_IMMAP /* IMMR dump support */
+#define CONFIG_CMD_IRQ /* irqinfo */
+#define CONFIG_CMD_ITEST /* Integer (and string) test */
+#define CONFIG_CMD_JFFS2 /* JFFS2 Support */
+#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */
+#define CONFIG_CMD_MISC /* Misc functions like sleep etc */
+#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
+#define CONFIG_CMD_NFS /* NFS support */
+#define CONFIG_CMD_PING /* ping support */
+#define CONFIG_CMD_PORTIO /* Port I/O */
+#define CONFIG_CMD_REGINFO /* Register dump */
+#define CONFIG_CMD_RUN /* run command in env variable */
+#undef CONFIG_CMD_SDRAM /* SDRAM DIMM SPD info printout */
+#undef CONFIG_CMD_SPI /* SPI utility */
+#undef CONFIG_CMD_KGDB
+
+/*
+ * I2C
+ */
+/* EEPROM Configuration */
+/* enable I2C and select the hardware/software driver */
+#if defined(CONFIG_CMD_I2C)
+#define CONFIG_HARD_I2C /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_I2C_CMD_TREE
+#define I2C_PORT 3 /* pins are on Port D */
+#endif
+
+/*
+ * SPI
+ */
+#if defined(CONFIG_CMD_SPI)
+#define CONFIG_SPI
+#define CONFIG_HARD_SPI
+#define CONFIG_MPC8XXX_SPI
+#endif
+
+/*
+ * FPGA Control
+*/
+
+#if defined(CONFIG_CMD_FPGA)
+#define CONFIG_FPGA
+#define CONFIG_FPGA_XILINX
+#define CONFIG_FPGA_COUNT 1
+#endif
+#define FPGA_DONE 0x80000000
+#define FPGA_BUSY 0x40000000
+
+
+
+/*
+ * Whatever CFG_RESET_ADDRESS is set to, it needs to be invalid
+ * so that it will cause a machine check and thus a reset
+ * 0xC0000000 is invalid (see cta Programmers guide v3)
+ */
+#define CFG_RESET_ADDRESS 0xC0000000
+
+/* ide disk partitions */
+#if defined(CONFIG_CMD_IDE)
+#define CONFIG_ISO_PARTITION
+#define CFG_IDE_MAXBUS 1
+#define CFG_IDE_MAXDEVICE 1
+#define CFG_ATA_IDE0_OFFSET 0x0000
+#define CFG_ATA_BASE_ADDR 0x20000000
+#define CFG_ATA_DATA_OFFSET 0x00000000
+#define CFG_ATA_REG_OFFSET 0x00000000
+#define CFG_ATA_ALT_OFFSET 0x00010000
+#endif
+
+/*
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
+#if defined(CONFIG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#undef CONFIG_BOOTCOMMAND /* autoboot command */
+
+#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\"" \
+ " to mount root filesystem over NFS;echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "ipaddr=192.168.1.10\0" \
+ "serverip=192.168.1.20\0" \
+ "gatewayip=192.168.1.1\0" \
+ "netmask=255.255.255.0\0" \
+ "rootpath=/opt/eldk/4.1/ppc_82xx\0" \
+ "bootfile=uImage-2.6.19.2-nfs\0" \
+ "kernel_addr=fe050000\0" \
+ "ramdisk_addr=fe150000\0" \
+ "hostname=5000S\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "flash_nfs=run nfsargs addip;" \
+ "bootm ${kernel_addr}\0" \
+ "flash_self=run ramargs addip;" \
+ "bootm ${kernel_addr} ${ramdisk_addr}\0" \
+ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run flash_nfs"
+
+/*
+ * Debugging Support
+ */
+#if defined(CONFIG_CMD_KGDB)
+#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
+#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
+#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
+#define CONFIG_KGDB_INDEX 2 /* which serial channel for kgdb */
+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */
+#endif
+/* include support for bzip2 compressed images */
+#define CONFIG_BZIP2
+#undef CONFIG_WATCHDOG /* disable cpu specific watchdog */
+
+/*
+ * Command Line Support
+ */
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_CMDLINE_EDITING
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "U-Boot> " /* Monitor Command Prompt */
+
+/*
+ * Debugging Support
+ */
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
+#define CFG_MEMTEST_END 0x03000000 /* 1 ... 15 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x00100000 /* default load address */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/*
+ * CFG_FLASH_BASE is the boot flash base address
+ */
+#define CFG_FLASH_PROTECTION 1 /* Real (hardware) sectors protection */
+#define CFG_FLASH_BASE 0xFE000000
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */
+#define CFG_MAX_FLASH_SECT 35 /* max num of sects on one chip */
+
+#define CFG_DIRECT_FLASH_TFTP
+
+#if defined(CONFIG_CMD_JFFS2)
+#define CFG_JFFS2_NUM_BANKS CFG_MAX_FLASH_BANKS
+#define CFG_JFFS2_SORT_FRAGMENTS
+
+/*
+ * JFFS2 partitions
+ *
+ */
+
+/* mtdparts command line support */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT "nor0=cta5000s-0"
+#define MTDPARTS_DEFAULT "mtdparts=cta5000s-0:256k(u-boot)," \
+ "64k(env),1344k(kernel),-(frdisk)\0"
+#define CFG_JFFS2_FIRST_SECTOR 29
+#define CFG_JFFS2_FIRST_BANK 1
+#define CFG_JFFS_SINGLE_PART 1
+#endif /* CFG_CMD_JFFS2 */
+
+#define CFG_MONITOR_BASE TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#endif
+
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
+
+#define CFG_ENV_IS_IN_FLASH
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE (64 * 1024) /* Reserve 32 kB for env */
+#define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#define CFG_FLASH_SIZE 2 /* 2MB of boot flash */
+#endif /* CFG_ENV_IS_IN_FLASH */
+
+#define CFG_IMMR 0xF0000000
+#define CFG_UHW_IMMR 0xF000 /* upper half word */
+
+#define CFG_INIT_RAM_ADDR CFG_IMMR
+#define CFG_INIT_RAM_END 0x2000 /* End of used area in DPRAM */
+#define CFG_GBL_DATA_SIZE 128 /* size/bytes reserved for initial */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_SDRAM_SIZE 64 /* in MB */
+
+/*
+ * Hard reset configuration word
+ * BIT Neumonic Value
+ * 0 EARB 0 External Arbitration is disabled
+ * 1 EXMC 0 External Memory Controller is not present
+ * 2 CDIS 0 Core is Active
+ * 3 EBM 0 External Bus mode
+ * 4-5 BPS 10 16 Bit Boot Port Size
+ * 6 CIP 1 Exceptions are vectored to 0x000n_nnnn
+ * 7 ISPS 0 Internal Port Size
+ * 8-9 L2CPC 01 L2 Cache Pins
+ * 10-11 DPPC 01 Data Parity pin
+ * 12 0 Reserved
+ * 13-15 ISB 100 Internal Space Base Select is 0xF000_0000
+ * 16 BMS 1 Boot Memory Space, LOMEM, 0x0000_0000
+ * 17 BBD 0 Bus Busy Disable
+ * 18-19 MMR 00 Mask Masters Request
+ * 20-21 LBPC 00 Local Bus Pin Configuration
+ * 22-23 APPC 11 Address Parity Pin Configuration
+ * 24-25 CS10PC 01 CS10 Pin Configuration
+ * 26 ALD_EN 0 CP Auto load is disabled
+ * 27 0 Reserved
+ * 28-31 MODCK_H 101 Clock Reset, (PCI_MODE pin is high)
+ *
+*/
+
+#define CFG_HRCW_MASTER (HRCW_BPS10 |\
+ HRCW_CIP |\
+ HRCW_L2CPC01 |\
+ HRCW_DPPC01 |\
+ HRCW_ISB100 |\
+ HRCW_BMS |\
+ HRCW_APPC11 |\
+ HRCW_CS10PC01 |\
+ HRCW_MODCK_H0101)
+
+/* No slaves */
+#define CFG_HRCW_SLAVE1 0
+#define CFG_HRCW_SLAVE2 0
+#define CFG_HRCW_SLAVE3 0
+#define CFG_HRCW_SLAVE4 0
+#define CFG_HRCW_SLAVE5 0
+#define CFG_HRCW_SLAVE6 0
+#define CFG_HRCW_SLAVE7 0
+
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#define CFG_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPUs */
+#if defined(CONFIG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+#define CFG_HID0_INIT 0
+#define CFG_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE)
+#define CFG_HID2 0
+
+/**************************************************************************
+ * SIUMCR, SIU Memory Config. Register.
+ * This register should be initialized prior to making any of the memory
+ * spaces valid. Other regeisters in this list are related to the system
+ * clock.
+ *************************************************************************/
+#define CFG_SIUMCR 0x25340000
+#define CFG_SYPCR 0xFFFFFFC3
+#define CFG_SWSR 0x0000
+#define CFG_BCR 0x00000000
+#define CFG_PPC_ACR 0x02
+#define CFG_PPC_ALRH 0x01234567
+#define CFG_PPC_ALRL 0x89ABCDEF
+#define CFG_LCL_ACR 0x02
+#define CFG_LCL_ALRH 0x01234567
+#define CFG_LCL_ALRL 0x89ABCDEF
+#define CFG_TESCR1 0x00000000
+#define CFG_TESCR2 0x00000000
+#define CFG_LTESCR2 0x00000000
+#define CFG_LTESCR1 0x00000000
+#define CFG_PDTEA 0x00000000
+#define CFG_PDTEM 0x00
+#define CFG_LDTEA 0x00000000
+#define CFG_LDTEM 0x00
+/* SCCR_DFBR01 is 0x00000001 see cpu/mpc8260.c */
+#define CFG_SCCR SCCR_DFBRG01
+
+/* Aztek values */
+#define CFG_RMR 0x00000000
+#define CFG_TMCNTSC 0x00000000
+#define CFG_PISCR 0x00000000
+#define CFG_RCCR 0
+
+/*
+ * From live sys: PSDMR = 0xa4b70000, but RedBoot halMemoryMap.h reports
+ * value below as "initial"
+ */
+#define CFG_PSDMR 0xc34da4b6
+#define CFG_PSRT 0x1e
+#define CFG_LSDMR 0x00008f00
+#define CFG_LSRT 0x8f
+#define CFG_MPTPR 0x1f00
+
+/**************************************************************************
+ * Memory Map From CT Programmers Guide
+ * --------------------------------------------
+ * Address Range Bytes Data Bus Bits Function
+ * 0x00000000 - 0x01FFFFFF 0x04000000 64 SDRAM
+ * 0x20000000 - 0x20000010 0x00000010 16 Compact Flash, task
+ * file access (IO)
+ * 0x20010000 - 0x20010010 0x00000010 16 CompactFlash,
+ * alternate status &
+ * device control (CTRL)
+ * 0x20020000 - 0x200200FF 0x00000100 8 FPGA
+ * 0x20030000 - 0x200300FF 0x00000100 8 CPU CPLD
+ * 0x20040000 - 0x20041FFF 0x00002000 8 Framer Block
+ * 0x20050000 - 0x20057FFF 0x00008000 16 TSI
+ * 0xF0000000 - 0xF001FFFF 0x00020000 Various Internal Memory
+ * 0xFE000000 - 0xFE1FFFFF 0x00200000 16 Boot FLASH
+ *************************************************************************/
+
+/* Base Address definitions */
+#define CFG_COMPACT_FLASH_IO_BASE (0x20000000)
+#define CFG_COMPACT_FLASH_CTRL_BASE (0x20010000)
+#define CFG_FPGA_BASE (0x20020000)
+#define CFG_CPU_CPLD_BASE (0x20030000)
+#define CFG_FRAMER_BASE (0x20040000)
+#define CFG_TSI_BASE (0x20050000)
+
+/* Boot flash memory space */
+#define CFG_BR0_PRELIM ((CFG_FLASH_BASE & BRx_BA_MSK) |\
+ BRx_PS_16 |\
+ BRx_MS_GPCM_P |\
+ BRx_V)
+
+#define CFG_OR0_PRELIM (MEG_TO_AM(CFG_FLASH_SIZE) |\
+ ORxG_SCY_2_CLK |\
+ ORxG_TRLX |\
+ ORxG_EHTR)
+
+/* 1 bank of SDRAM on 60x bus */
+#define CFG_BR1_PRELIM ((CFG_SDRAM_BASE & BRx_BA_MSK) |\
+ BRx_PS_64 |\
+ BRx_DECC_ECC |\
+ BRx_MS_SDRAM_P |\
+ BRx_V)
+
+#define CFG_OR1_PRELIM ((MEG_TO_AM(CFG_SDRAM_SIZE) & ORxS_SDAM_MSK) |\
+ ORxS_BPD_4 |\
+ ORxS_ROWST_PBI0_A9 |\
+ ORxS_NUMR_12)
+
+/* Compact Flash Control Registers
+ */
+#define CFG_BR2_PRELIM ((CFG_COMPACT_FLASH_CTRL_BASE & BRx_BA_MSK) |\
+ BRx_PS_16 |\
+ BRx_MS_UPMB |\
+ BRx_V)
+
+#define CFG_OR2_PRELIM (ORxU_AM_MSK |\
+ ORxU_BCTLD |\
+ ORxU_BI |\
+ ORxU_EHTR_1IDLE)
+
+/* Compact Flash IO memory
+ */
+#define CFG_BR3_PRELIM ((CFG_COMPACT_FLASH_IO_BASE & BRx_BA_MSK) |\
+ BRx_PS_16 |\
+ BRx_MS_UPMB |\
+ BRx_V)
+
+#define CFG_OR3_PRELIM (ORxU_AM_MSK |\
+ ORxU_BCTLD |\
+ ORxU_BI |\
+ ORxU_EHTR_1IDLE)
+
+/* FPGA memory
+ */
+#define CFG_BR4_PRELIM ((CFG_FPGA_BASE & BRx_BA_MSK) |\
+ BRx_MS_GPCM_P |\
+ BRx_PS_8 |\
+ BRx_V)
+
+#define CFG_OR4_PRELIM (ORxG_AM_MSK |\
+ ORxG_SCY_1_CLK |\
+ ORxG_TRLX |\
+ ORxG_EHTR)
+
+/* CPU CPLD memory space
+ */
+#define CFG_BR5_PRELIM ((CFG_CPU_CPLD_BASE & BRx_BA_MSK) |\
+ BRx_MS_GPCM_P |\
+ BRx_PS_8 |\
+ BRx_V)
+
+#define CFG_OR5_PRELIM (ORxG_AM_MSK |\
+ ORxG_CSNT |\
+ ORxG_ACS_DIV4 |\
+ ORxG_SCY_1_CLK |\
+ ORxG_TRLX |\
+ ORxG_EHTR)
+
+
+/* Framer memory space
+ */
+#define CFG_BR6_PRELIM ((CFG_FRAMER_BASE & BRx_BA_MSK) |\
+ BRx_MS_GPCM_P |\
+ BRx_PS_8 |\
+ BRx_V)
+
+#define CFG_OR6_PRELIM (ORxG_AM_MSK |\
+ ORxG_CSNT |\
+ ORxG_ACS_DIV4 |\
+ ORxG_SCY_8_CLK |\
+ ORxG_TRLX |\
+ ORxG_EHTR)
+
+/* Time Slot Interchange
+ */
+#define CFG_BR7_PRELIM ((CFG_TSI_BASE & BRx_BA_MSK)|\
+ BRx_MS_GPCM_P |\
+ BRx_PS_16 |\
+ BRx_V)
+
+#define CFG_OR7_PRELIM (ORxG_AM_MSK |\
+ ORxG_CSNT |\
+ ORxG_ACS_DIV4 |\
+ ORxG_SCY_6_CLK |\
+ ORxG_TRLX |\
+ ORxG_EHTR)
+
+#define CFG_CTA_MAMR_PRELIM (MxMR_BSEL |\
+ MxMR_OP_NORM |\
+ MxMR_AMx_TYPE_0 |\
+ MxMR_DSx_1_CYCL |\
+ MxMR_RLFx_16X |\
+ MxMR_WLFx_16X |\
+ MxMR_TLFx_16X)
+
+/* Note: UPM B has same configuration as UPM A
+ */
+#define CFG_CTA_MBMR_PRELIM (CFG_CTA_MAMR_PRELIM)
+
+/************************************************************************
+ * Initial values for UPM RAM, for compactFlash read cycles
+ * Both compactFlash memory spaces use the same timing.
+ *
+ * The values for UPM RAM are described in the CTA Programmer's Guide.
+ ***********************************************************************/
+#define CTA_UPM_READ_CYCLE_NUM_RAM_WORDS (8)
+#define CTA_UPM_WRITE_CYCLE_NUM_RAM_WORDS (7)
+
+#define CTA_UPM_READ_CYCLE_RAM_WORD_0 (0xcffffc00)
+#define CTA_UPM_READ_CYCLE_RAM_WORD_1 (0x0fffff00)
+#define CTA_UPM_READ_CYCLE_RAM_WORD_2 (0x0ffffc00)
+#define CTA_UPM_READ_CYCLE_RAM_WORD_3 (0x0ff3c800)
+#define CTA_UPM_READ_CYCLE_RAM_WORD_4 (0x0ff3c800)
+#define CTA_UPM_READ_CYCLE_RAM_WORD_5 (0x0ff3fc84)
+#define CTA_UPM_READ_CYCLE_RAM_WORD_6 (0x0ffffc00)
+#define CTA_UPM_READ_CYCLE_RAM_WORD_7 (0x2ffffc01)
+
+#define CTA_UPM_WRITE_CYCLE_RAM_WORD_0 (0xcffffc00)
+#define CTA_UPM_WRITE_CYCLE_RAM_WORD_1 (0x0fffff00)
+#define CTA_UPM_WRITE_CYCLE_RAM_WORD_2 (0x0ffffc00)
+#define CTA_UPM_WRITE_CYCLE_RAM_WORD_3 (0x0ffcfc80)
+#define CTA_UPM_WRITE_CYCLE_RAM_WORD_4 (0x0ffcfc80)
+#define CTA_UPM_WRITE_CYCLE_RAM_WORD_5 (0x0ffffc00)
+#define CTA_UPM_WRITE_CYCLE_RAM_WORD_6 (0x3ffffc05)
+#define UNUSED 0xFFFFFFFF
+
+/*
+ * Some Aztek specific CTA defines
+ * - used in cta5000s.c
+ * - initial values in cta5000s.c all from Ch. 6 of
+ * cta Progammers Manual rev 3
+ */
+#define CFG_AZ_FPGA 1
+#define CFG_AZ_CF 1
+#define CFG_AZ_FAN 1
+#define CFG_AZ_ADC 1
+#define CFG_AZ_RY_BY 1
+#define CFG_AZ_EXALM 1
+#define CFG_AZ_ESA 1
+#define CFG_AZ_MDM 1
+#define CFG_AZ_PLL 1
+#define CFG_AZ_SPI 1
+#define CFG_AZ_TSI 1
+#define CFG_AZ_MEZZ 1
+#define CFG_AZ_BP 1
+#define CFG_AZ_SCC1 1
+#define CFG_AZ_SCC2 0
+#define CFG_AZ_SCC3 1
+#define CFG_AZ_SMC1 0
+#define CFG_AZ_MCC1 0
+#define CFG_AZ_MCC2 1
+#define CFG_AZ_NA 0 /* not available */
+#define CFG_AZ_UN 0 /* unused */
+
+#endif /* __CONFIG_H */
--
1.5.5.1
^ permalink raw reply related [flat|nested] 5+ messages in thread