From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefan Roese <sr@denx.de>
Date: Fri, 23 May 2008 14:29:42 +0200
Subject: [U-Boot-Users] A simple howto boot sequoia (ARCH=powerpc) using
	flattened device tree (FDT)
In-Reply-To: <4836B4AA.5050600@ge.com>
References: <200805142254.16731.niklaus.giger@member.fsf.org>
	<200805231004.16936.sr@denx.de> <4836B4AA.5050600@ge.com>
Message-ID: <200805231429.42728.sr@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Friday 23 May 2008, Jerry Van Baren wrote:
> > Correct. And when the "chosen" node exists, the "bootm" doesn't override
> > the bootargs. There are three ways to change this behavior:
> >
> > a) Delete the chosen node from the dts
> > b) Run "fdt chosen" in U-Boot before booting Linux
> > c) Change U-Boot to enable overwriting the chosen node upon Linux
> >    booting without needing to call "fdt chosen"
> >
> > Currently I usually use a) if possible. So I won't add a chosen node when
> > I create a new board port. But I would like to see c) implemented too for
> > "older" arch/powerpc board ports (like Sequoia) that have a chosen node
> > in their dts. Anyone care to send a patch for this? :)
>
> Note: the difference between b) and c) is that "bootm" doesn't set the
> "force" flag but "fdt chosen" does, so "fdt chosen" overrides all
> /chosen property settings (that u-boot knows about).

Yes, I noticed this some time ago.

> It would be relatively easy to do c) by creating Yet Another Config
> Variable that bootm used for the "force" flag rather than hardcoding it.
>   I'm not wild about creating YACV.  Adding Yet Another Parameter to
> bootm is probably as bad or worse.  Hmmmm.

I'm wondering who really wants to *not* override the chosen bootargs property? 
I'm probably missing something here, but for me it just makes no sense to not 
override the bootargs property with the U-Boot bootargs env variable.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================