From mboxrd@z Thu Jan  1 00:00:00 1970
From: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date: Mon, 2 Jun 2008 11:01:16 +0200
Subject: [U-Boot-Users] Ethernet POST freeze on 440EPx boards (PMC440,
	sequoia)
Message-ID: <200806021101.16979.matthias.fuchs@esd-electronics.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi,

I noticed some strange issues with our PMC440 (PPC440PEx based) board and
also with the sequoia eval platform.

In a certain configuration these boards stuck during the Ethernet POST tests.
When they got stuck, it is even not possible to attach with a BDI2000.

On the console you only see this:

U-Boot 1.3.1 (May 30 2008 - 17:01:42)

CPU: ? AMCC PowerPC 440EPx Rev. A at 533.333 MHz (PLB=133, OPB=66, EBC=66 MHz)
? ? ? ?Security/Kasumi support
? ? ? ?Bootstrap Option H - Boot ROM Location I2C (Addr 0x52)
? ? ? ?Internal PCI arbiter enabled, PCI async ext clock used
? ? ? ?32 kB I-Cache 32 kB D-Cache
Board: Sequoia - AMCC PPC440EPx Evaluation Board, Rev. F, PCI=33 MHz
I2C: ? ready
DTT: ? 1 is 38 C
DRAM: ?256 MB
FLASH: 64 MB
NAND: ?32 MiB
PCI: ? Bus Dev VenId DevId Class Int
? ? ? ? 00 ?0c ?168c ?0013 ?0200 ?43
In: ? ?serial
Out: ? serial
Err: ? serial
USB: ? Host(int phy) Device(ext phy)
Net: ? ppc_4xx_eth0, ppc_4xx_eth1


I first noticed this behavior on our PMC440 boards. These boards are similiar to the Sequoia platform
(256MB DDR2 RAM, 2x Gigabit Ethernet, ...). Playing with some printfs I found out that the board got stuck 
in the Ethernet POST. When I disable U-Boot's LOG_BUFFER feature the problem dissapears.
First I never noticed this bahavior on the sequoia platform and I thought about a PMC440 specific issue.
Then I compiled U-Boot 1.3.1 for the sequoia platform (1.3.1 is used on PMC440 until now). Last week
I got the same issue on the sequoia platform. Not that often as on the PMC440, but the same issue.
Because it is easy to reproduce on PMC440 boards, I played a little bit with different configurations:

1) With LOG_BUFFER enabled: often, about every 2nd boot
2) Without LOG_BUFFER (POST messages come out in the console) -> issue never seens
3) Modified 4xx Ether POST with RX Buffers in OCM -> issue never seens
4) DCACHE turned on -> issue never seens

On the sequoia board I've only seens it after a reboot from Linux. But on PMC440 also after poweron.
This must not have any meaning because I do more testing with our board than with the eval board :-)

printf debugging showed up that the boards get stuck in post/cpu/ppc4xx/ether.c in test_ctlr()/ether_post_send().
Some packets are send, recevied and checked correctly. Then suddenly at a random packet size ether_post_send() 
freezes the board.

Did anybody else see this behavior? 
Did we miss any EMAC errata?


Matthias