From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefan Roese <sr@denx.de>
Date: Mon, 2 Jun 2008 21:17:16 +0200
Subject: [U-Boot-Users] [PATCH] NAND_SPL: Remove initdram() call from
	nand_boot()
In-Reply-To: <4844452C.60805@freescale.com>
References: <1212432526-26485-1-git-send-email-sr@denx.de>
	<4844452C.60805@freescale.com>
Message-ID: <200806022117.16136.sr@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Monday 02 June 2008, Scott Wood wrote:
> Stefan Roese wrote:
> > This patch removes the SDRAM initilization call initdram() from
> > nand_boot(). This is done mainly because I experienced problems with
> > some boards like Kilauea (405EX), which don't have internal SRAM (OCM)
> > and relocation needs to be done to SDRAM before the NAND controller
> > can get accessed. When initdram() is called later on in nand_boot(),
> > this can lead to problems with variables in the bss sections like
> > nand_ecc_pos[].
>
> Are there any existing platforms that need an initdram() added elsewhere
> to accomodate this?

Currently only the 4xx ones. I sent the patch for them a few minutes ago as 
you already noticed.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================