From: Wolfgang Denk <wd@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] [PATCH/review] Blackfin: add support for BF538/BF539
Date: Thu, 05 Jun 2008 15:24:04 +0200 [thread overview]
Message-ID: <20080605132404.BC478240C8@gemini.denx.de> (raw)
In-Reply-To: Your message of "Wed, 04 Jun 2008 16:16:39 EDT." <200806041616.40360.vapier@gentoo.org>
Dear Mike,
in message <200806041616.40360.vapier@gentoo.org> you wrote:
>
> > To be honest, as far as I can see, all other architectures get by
> > without such "macros" without loosing anything and the arguments you
> > gave this far did not convince me that they are needed.
>
> other arches do not have a central control of the architecture and allow any
> random group out there to create their own. these headers provide API
> compatibility across all Blackfin compilers and projects.
I hope I'm misinterpreting you - but to me that sounds as if you
consider peer review that eliminates bogus code and tries to come up
with better solutions a bad thing? Because you have to give up
"central control", i. e. the ability to write the code exactly as you
think it should be done?
Please tell me that you do NOT think that this code is so good so
that no peer review on it is allowed because it would only ruin the
superior quality of it...
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Anyone can count the seeds in an apple.
No one can count the apples in a seed.
next prev parent reply other threads:[~2008-06-05 13:24 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-01 5:38 [U-Boot-Users] [PATCH/review] Blackfin: dont call i2c_init() from board_init_r() Mike Frysinger
2008-06-01 5:38 ` [U-Boot-Users] [PATCH/review] Blackfin: protect default flash according to CFG_MONITOR_LEN Mike Frysinger
2008-06-01 5:38 ` [U-Boot-Users] [PATCH/review] Blackfin: update proc headers from toolchain Mike Frysinger
2008-06-01 5:38 ` [U-Boot-Users] [PATCH/review] Blackfin: unify cache handling code Mike Frysinger
2008-06-01 5:38 ` [U-Boot-Users] [PATCH/review] Blackfin: use common memcpy routine during init Mike Frysinger
2008-06-01 5:38 ` [U-Boot-Users] [PATCH/review] Blackfin: enable support for nested interrupts Mike Frysinger
2008-06-01 5:38 ` [U-Boot-Users] [PATCH/review] Blackfin: respect CONFIG_CLKIN_HALF Mike Frysinger
2008-06-01 5:38 ` [U-Boot-Users] [PATCH/review] Blackfin: setup a sane default EBIU_SDBCTL for SDRAM controllers Mike Frysinger
2008-06-01 5:38 ` [U-Boot-Users] [PATCH/review] Blackfin: use on-chip syscontrol() rom function when available Mike Frysinger
2008-06-01 5:38 ` [U-Boot-Users] [PATCH/review] Blackfin: use on-chip syscontrol() to reset Mike Frysinger
2008-06-01 5:38 ` [U-Boot-Users] [PATCH/review] Blackfin: add support for BF538/BF539 Mike Frysinger
2008-06-01 20:14 ` Wolfgang Denk
2008-06-01 21:18 ` Mike Frysinger
2008-06-01 22:05 ` Wolfgang Denk
2008-06-01 23:03 ` Mike Frysinger
2008-06-04 8:56 ` Detlev Zundel
2008-06-04 10:18 ` Mike Frysinger
2008-06-04 17:36 ` Detlev Zundel
2008-06-04 20:16 ` Mike Frysinger
2008-06-05 13:13 ` Detlev Zundel
2008-06-05 13:24 ` Wolfgang Denk [this message]
2008-06-01 19:56 ` [U-Boot-Users] [PATCH/review] Blackfin: use on-chip syscontrol() to reset Wolfgang Denk
2008-06-01 21:20 ` Mike Frysinger
2008-06-01 22:07 ` Wolfgang Denk
2008-06-04 9:05 ` Detlev Zundel
2008-06-04 10:10 ` Mike Frysinger
2008-06-01 19:54 ` [U-Boot-Users] [PATCH/review] Blackfin: setup a sane default EBIU_SDBCTL for SDRAM controllers Wolfgang Denk
2008-06-01 21:12 ` Mike Frysinger
2008-06-01 21:59 ` Wolfgang Denk
2008-06-01 22:49 ` Mike Frysinger
2008-06-01 19:47 ` [U-Boot-Users] [PATCH/review] Blackfin: protect default flash according to CFG_MONITOR_LEN Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080605132404.BC478240C8@gemini.denx.de \
--to=wd@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox