[U-Boot-Users] [PATCH] i.MX31: fixed CTRL-C detection

[Juergen Kilb <J.Kilb@gmx.de>]

The Register URXD contains status information in bits [15..8].
With status bit 15 set, CTRL-C was reported as 0x8003 instead
of 0x03. Therefore CTRL-C was not detected.
To solve this, bits [15..8] were masked out now.

Signed-off-by: Juergen Kilb <J.Kilb@gmx.de>
---
 cpu/arm1136/mx31/serial.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/cpu/arm1136/mx31/serial.c b/cpu/arm1136/mx31/serial.c
index 1cad8f9..f498599 100644
--- a/cpu/arm1136/mx31/serial.c
+++ b/cpu/arm1136/mx31/serial.c
@@ -63,6 +63,7 @@
 #define  URXD_FRMERR     (1<<12)
 #define  URXD_BRK        (1<<11)
 #define  URXD_PRERR      (1<<10)
+#define  URXD_RX_DATA    (0xFF)
 #define  UCR1_ADEN       (1<<15) /* Auto dectect interrupt */
 #define  UCR1_ADBR       (1<<14) /* Auto detect baud rate */
 #define  UCR1_TRDYEN     (1<<13) /* Transmitter ready interrupt enable */
@@ -165,7 +166,7 @@ void serial_setbrg (void)
 int serial_getc (void)
 {
 	while (__REG(UART_PHYS + UTS) & UTS_RXEMPTY);
-	return __REG(UART_PHYS + URXD);
+	return (__REG(UART_PHYS + URXD) & URXD_RX_DATA); /* mask out status from upper word */
 }
 
 void serial_putc (const char c)
-- 
1.5.5.1