From: Alessandro Rubini <rubini-list@gnudd.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] Stops booting after RAM info
Date: Tue, 17 Jun 2008 17:53:03 +0200 [thread overview]
Message-ID: <20080617155303.GA10780@mail.gnudd.com> (raw)
In-Reply-To: <4857C743.7060300@GlobalAutomationSystems.com>
> As far as I know CFG_MAX_FLASH_BANKS should be set to 1 always.
> Multiple flash banks in u-boot are not supported.
I have a system with two banks.
u-boot> flinfo
Bank # 1: CFI conformant FLASH (16 x 16) Size: 16 MB in 131 Sectors
Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x1B
Erase timeout: 4096 ms, write timeout: 1 ms
Buffer write timeout: 2 ms, buffer size: 64 bytes
Sector Start Addresses:
60000000 RO 60008000 RO 60010000 RO 60018000 [...]
Bank # 2: CFI conformant FLASH (16 x 16) Size: 16 MB in 131 Sectors
Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x1B
Erase timeout: 4096 ms, write timeout: 1 ms
Buffer write timeout: 2 ms, buffer size: 64 bytes
Sector Start Addresses:
10000000 RO 10008000 RO 10010000 RO 10018000 [...]
As expected, it also works in the older board with one bank only (no
CFI QRY found for second bank and everything continues as smooth as always).
/alessandro
next prev parent reply other threads:[~2008-06-17 15:53 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-16 8:05 [U-Boot-Users] Stops booting after RAM info navin karnam
2008-06-17 4:59 ` navin karnam
2008-06-17 5:36 ` navin karnam
2008-06-17 14:16 ` Andrejs Cainikovs
2008-06-17 15:53 ` Alessandro Rubini [this message]
2008-06-17 21:11 ` Wolfgang Denk
2008-06-17 23:43 ` Andrejs Cainikovs
2008-06-18 7:37 ` Wolfgang Denk
2008-06-18 7:44 ` Andrejs Cainikovs
2008-06-18 12:28 ` Haavard Skinnemoen
2008-06-18 14:05 ` Andrejs Cainikovs
2008-06-18 14:39 ` navin karnam
2008-06-18 17:30 ` Andrejs Cainikovs
2008-06-18 20:01 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080617155303.GA10780@mail.gnudd.com \
--to=rubini-list@gnudd.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox