From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefan Roese <sr@denx.de>
Date: Tue, 1 Jul 2008 10:16:22 +0200
Subject: [U-Boot-Users] Using DDR1 in AMCC 460EX custom design
In-Reply-To: <4869E57C.3090809@embedded-sol.com>
References: <486926B9.1090102@embedded-sol.com> <200806302051.20589.sr@denx.de>
	<4869E57C.3090809@embedded-sol.com>
Message-ID: <200807011016.22722.sr@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Felix,

On Tuesday 01 July 2008, Felix Radensky wrote:
> Thanks a lot for a very useful info. I'll ask hardware designers to be
> in contact
> with AMCC. Did you have a chance to test ECC enabled DDR2 on Canyonlands ?

No. I don't have SODIMM with ECC. But I don't expect bigger problems here, 
since this code is tested with ECC enabled on other 4xx platforms like the 
AMCC Katmai 440SPe eval board.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================