From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] Release status - things to be done
Date: Mon, 7 Jul 2008 11:05:21 +0200 [thread overview]
Message-ID: <200807071105.21765.sr@denx.de> (raw)
In-Reply-To: <20080705230540.22A8C248AC@gemini.denx.de>
Hi Wolfgang,
On Sunday 06 July 2008, Wolfgang Denk wrote:
> Open question:
<snip>
> 2994 05/30 sascha.laue at liebh [U-Boot-Users] [PATCH] Change GPIO to
> control the LSB transmitter on lwmon5 board. -> for ppc_4xx custodian
Forgot about that, sorry. I checked and it doesn't apply. Seems to be depend
on other non-applied patches. I asked Sascha to resubmit.
<snip>
> 3766 06/12 "Brian S. Park" Re: [U-Boot-Users] U-Boot and Linux on
> Walnut based board -> problem confirmed, to be taken care of by PPC4xx
> custodian.
I just tested with current TOT U-Boot (c956717a) and it works (again). Not
sure what caused this problem though.
> 3828 06/14 Larry Johnson [U-Boot-Users] [PATCH] ppc4xx: Update and
> add FDT to Korat board support 3829 06/14 Larry Johnson
> [U-Boot-Users] [PATCH] pp44xx: Remove implementation of testdram() from
> Korat board support -> for ppc4xx custodian
This was submitted *after* the merge window closed. So I staged it into my
internal next branch. Or should I apply those patches to master and ask you
to pull them now?
> 3871 06/16 Stefan Roese [U-Boot-Users] [PATCH] cfi-flash: Fix
> problem in flash_toggle(), busy was not detected reliably -> for CFI-Flash
> custodian
Already applied:
fb8c061ea05fc68d37e2a8b9f8c949d76c8d71a8
> 3905 06/17 "Nobuhiro Iwamats Re: [U-Boot-Users] [PATCH][RFC] pci: Remove
> CONFIG_PCI_SKIP_HOST_BRIDGE and Add check PCI class 3908 06/17 Nobuhiro
> Iwamatsu [PATCH][RFC] pci: Add check PCI bridge class (Re: [U-Boot-Users]
> [PATCH][RFC] pci: Remove CONFI -> asked other users (Stefan Roese) for
> feedback
Will review and test today/tomorrow.
> 4026 06/18 Jason McMullan [U-Boot-Users] [PATCH] mtd: SPI Flash:
> Winbond W25X16/WX2532/WX2564 support 4027 06/19 Jason McMullan
> [U-Boot-Users] [PATCH] mtd: SPI Flash: Support the ST Microelectronics
> M25P80 and M25P40 4028 06/19 "McMullan, Jason" [U-Boot-Users] MTD Winbond
> and MTD STMicro SPI Flash Support -> for MTD custodian
MTD custodian? We don't have one. Should I put those patches in my cfi-flash
custodian repository?
Again, those patches were submitted *after* the merge windows closed. So I
would normally queue them for the next merge window. Please let me know if
you want to merge them now.
Thanks.
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
next prev parent reply other threads:[~2008-07-07 9:05 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-05 23:05 [U-Boot-Users] Release status - things to be done Wolfgang Denk
2008-07-06 5:24 ` Shinya Kuribayashi
2008-07-06 7:17 ` Ben Warren
2008-07-06 7:54 ` Wolfgang Denk
2008-07-07 2:54 ` Nobuhiro Iwamatsu
2008-07-07 6:13 ` Ben Warren
2008-07-06 9:00 ` Magnus Lilja
2008-07-06 10:51 ` Jean-Christophe PLAGNIOL-VILLARD
2008-07-06 11:28 ` Nobuhiro Iwamatsu
2008-07-07 9:05 ` Stefan Roese [this message]
2008-07-07 9:37 ` Wolfgang Denk
2008-07-07 9:50 ` Stefan Roese
2008-07-07 10:21 ` Stefan Roese
2008-07-07 18:18 ` Scott Wood
2008-07-07 14:28 ` John Rigby
2008-07-07 15:03 ` Wolfgang Denk
2008-07-07 14:32 ` Scott Wood
2008-07-07 18:23 ` Jon Loeliger
2008-07-07 18:55 ` Kim Phillips
2008-07-07 20:30 ` Rune Torgersen
2008-07-07 20:41 ` Rune Torgersen
2008-07-09 23:34 ` Anatolij Gustschin
2008-07-10 11:12 ` Haavard Skinnemoen
-- strict thread matches above, loose matches on Subject: below --
2008-07-09 19:46 Liew Tsi Chung
2008-07-09 21:02 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200807071105.21765.sr@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox