[U-Boot-Users] Release status - things to be done

[Stefan Roese <sr@denx.de>]

On Monday 07 July 2008, Wolfgang Denk wrote:
> In message <200807071105.21765.sr@denx.de> you wrote:
> > >  3766  06/12 "Brian S. Park"    Re: [U-Boot-Users] U-Boot and Linux on
> > > Walnut based board -> problem confirmed, to be taken care of by PPC4xx
> > > custodian.
> >
> > I just tested with current TOT U-Boot (c956717a) and it works (again).
> > Not sure what caused this problem though.
>
> Well, the bug is bisectable, IIRC.
>
> I would like to be sure that the bug ius really fixed now, and will
> not show up in the next version again.
>
> Could you please check?

OK, I'll try to find some time today to do this too.

> > >  3828  06/14 Larry Johnson      [U-Boot-Users] [PATCH] ppc4xx: Update
> > > and add FDT to Korat board support 3829  06/14 Larry Johnson
> > > [U-Boot-Users] [PATCH] pp44xx: Remove implementation of testdram() from
> > > Korat board support -> for ppc4xx custodian
> >
> > This was submitted *after* the merge window closed. So I staged it into
> > my internal next branch. Or should I apply those patches to master and
> > ask you to pull them now?
>
> Your decision. I was asking because I didn't see any feedback.

I would like to get those patches pushed upstream now. I'll pull them into my 
custodian repo and ask for a pull soon.

> > >  4026  06/18 Jason McMullan     [U-Boot-Users] [PATCH] mtd: SPI Flash:
> > > Winbond W25X16/WX2532/WX2564 support 4027  06/19 Jason McMullan
> > > [U-Boot-Users] [PATCH] mtd: SPI Flash: Support the ST Microelectronics
> > > M25P80 and M25P40 4028  06/19 "McMullan, Jason"  [U-Boot-Users] MTD
> > > Winbond and MTD STMicro SPI Flash Support -> for MTD custodian
> >
> > MTD custodian? We don't have one. Should I put those patches in my
> > cfi-flash custodian repository?
>
> s/MTD/NAND/. I think SPI flash code should be  handled  by  the  NAND
> custodian - Scott?

Ufff. :)

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================