[U-Boot-Users] Freescale MPC8349EMDS hang on boot

[Kim Phillips <kim.phillips@freescale.com>]

On Wed, 16 Jul 2008 15:28:21 -0700
Ira Snyder <iws@ovro.caltech.edu> wrote:

> During the development, I noticed that adding and removing certain
> pieces of debugging code (which did not change any program state) caused
> the board to hang on boot, like so:
> ================================================================================
> 
> U-Boot 1.3.4-rc1-00001-gb89881c-dirty (Jul 16 2008 - 14:54:56) MPC83XX
> 
> Reset Status: External/Internal Soft, External/Internal Hard
> 
> CPU:   e300c1, MPC8349EA, Rev: 3.0 at 528 MHz, CSB: 264 MHz
> Board: Freescale MPC8349EMDS
> I2C:   

try reverting this commit:

commit 1c3dd43338a077165e7e0309cb3994e65d2bdbf8
Author: Grant Likely <grant.likely@secretlab.ca>
Date:   Tue Nov 13 22:18:33 2007 -0700

    powerpc: Backout relocation changes.
    
    Ugh.  I *hate* to back this change out, but these compiler flags don't
    work for relocation on all versions of GCC.  I've not been able to
    reproduce the environment in my setup (and hence, not been able to
    find a combination that *does* work), so I've got no choice but to go
    back to the old gcc flags and linker script.
    
    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

Kim