From: Ira Snyder <iws@ovro.caltech.edu>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] Freescale MPC8349EMDS hang on boot
Date: Thu, 17 Jul 2008 15:50:04 -0700 [thread overview]
Message-ID: <20080717225004.GC29634@ovro.caltech.edu> (raw)
In-Reply-To: <20080717165453.8080f4ff.kim.phillips@freescale.com>
On Thu, Jul 17, 2008 at 04:54:53PM -0500, Kim Phillips wrote:
> On Wed, 16 Jul 2008 15:28:21 -0700
> Ira Snyder <iws@ovro.caltech.edu> wrote:
>
> > During the development, I noticed that adding and removing certain
> > pieces of debugging code (which did not change any program state) caused
> > the board to hang on boot, like so:
> > ================================================================================
> >
> > U-Boot 1.3.4-rc1-00001-gb89881c-dirty (Jul 16 2008 - 14:54:56) MPC83XX
> >
> > Reset Status: External/Internal Soft, External/Internal Hard
> >
> > CPU: e300c1, MPC8349EA, Rev: 3.0 at 528 MHz, CSB: 264 MHz
> > Board: Freescale MPC8349EMDS
> > I2C:
>
> try reverting this commit:
>
> commit 1c3dd43338a077165e7e0309cb3994e65d2bdbf8
> Author: Grant Likely <grant.likely@secretlab.ca>
> Date: Tue Nov 13 22:18:33 2007 -0700
>
> powerpc: Backout relocation changes.
>
> Ugh. I *hate* to back this change out, but these compiler flags don't
> work for relocation on all versions of GCC. I've not been able to
> reproduce the environment in my setup (and hence, not been able to
> find a combination that *does* work), so I've got no choice but to go
> back to the old gcc flags and linker script.
>
> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
>
> Kim
Hello Kim,
Thanks for looking at this problem so quickly. I'll try reverting the
patch as soon as I'm done writing this email and post the results here.
I spent this afternoon trying to narrow down the problem exhibited by
the changes in my earlier email. I managed to narrow it down to the
.data section's start address being a multiple of 32 bytes, and the
bcsr code in checkboard().
I have attached a patch which causes my board to hang on boot in exactly
the same way that the earlier patch does. Removing the line from the
linker script makes the board boot perfectly, as long as the .data
section's start address is not on a 32 byte boundary by coincidence.
Ira
diff --git a/board/freescale/mpc8349emds/mpc8349emds.c b/board/freescale/mpc8349emds/mpc8349emds.c
index 9a312c3..f4792a9 100644
--- a/board/freescale/mpc8349emds/mpc8349emds.c
+++ b/board/freescale/mpc8349emds/mpc8349emds.c
@@ -165,6 +165,13 @@ int fixed_sdram(void)
int checkboard (void)
{
+ volatile immap_t *immr = (immap_t *)CFG_IMMR;
+ volatile u8 *bcsr = (u8 *)CFG_BCSR;
+ int in_pci_slot;
+
+ /* in a pci slot or standalone */
+ in_pci_slot = (bcsr[10] & 0x80) ? 1 : 0;
+
puts("Board: Freescale MPC8349EMDS\n");
return 0;
}
diff --git a/cpu/mpc83xx/u-boot.lds b/cpu/mpc83xx/u-boot.lds
index 99ad675..f605eab 100644
--- a/cpu/mpc83xx/u-boot.lds
+++ b/cpu/mpc83xx/u-boot.lds
@@ -79,6 +79,7 @@ SECTIONS
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
__fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+ . = ALIGN(32);
.data :
{
*(.data)
next prev parent reply other threads:[~2008-07-17 22:50 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-16 22:28 [U-Boot-Users] Freescale MPC8349EMDS hang on boot Ira Snyder
2008-07-17 21:54 ` Kim Phillips
2008-07-17 22:50 ` Ira Snyder [this message]
2008-07-18 11:59 ` Jerry Van Baren
2008-07-18 17:28 ` Ira Snyder
2008-07-18 18:17 ` Jerry Van Baren
2008-07-18 19:24 ` Ira Snyder
2008-07-18 19:57 ` Jerry Van Baren
2008-07-19 1:52 ` David Hawkins
2008-07-19 5:32 ` Timur Tabi
2008-07-19 17:17 ` David Hawkins
2008-07-19 17:49 ` [U-Boot-Users] RFQ: disable flash writes until after relocation? David Hawkins
2008-07-20 20:07 ` Wolfgang Denk
2008-07-21 15:48 ` Timur Tabi
2008-07-21 17:46 ` David Hawkins
2008-07-21 18:43 ` Timur Tabi
2008-07-21 18:33 ` Wolfgang Denk
2008-07-21 17:22 ` David Hawkins
2008-07-21 11:58 ` Jerry Van Baren
2008-07-21 17:36 ` David Hawkins
2008-07-21 17:56 ` Jerry Van Baren
2008-07-21 18:45 ` David Hawkins
2008-07-22 23:14 ` [U-Boot-Users] Freescale MPC8349EMDS BCSR corruption David Hawkins
2008-07-23 6:16 ` Dave Liu
2008-07-23 6:34 ` Dave Liu
2008-07-23 17:25 ` Ira Snyder
2008-07-29 1:36 ` David Hawkins
2008-07-29 3:42 ` David Hawkins
2008-10-08 3:50 ` [U-Boot] " David Hawkins
2008-10-09 5:46 ` Liu Dave-R63238
2008-07-17 23:18 ` [U-Boot-Users] Freescale MPC8349EMDS hang on boot Ira Snyder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080717225004.GC29634@ovro.caltech.edu \
--to=iws@ovro.caltech.edu \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox