From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefan Roese <sr@denx.de>
Date: Fri, 18 Jul 2008 12:34:10 +0200
Subject: [U-Boot-Users] ppc4xx: [PATCH] ML507 Board Support (Resubmit)
In-Reply-To: <1216291629-21639-1-git-send-email-ricardo.ribalda@uam.es>
References: <487EF310.5020305@seznam.cz>
	<1216291629-21639-1-git-send-email-ricardo.ribalda@uam.es>
Message-ID: <200807181234.10282.sr@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Thursday 17 July 2008, Ricardo Ribalda Delgado wrote:
> The Xilinx ML507 Board is a Virtex 5 prototyping board that includes,
> 	among others:
> 	-Virtex 5 FX FPGA (With a ppc440x5 in it)
> 	-256MB of SDRAM2
> 	-32MB of Flash
> 	-I2C Eeprom
> 	-System ACE chip
> 	-Serial ATA connectors
> 	-RS232 Level Conversors
> 	-Ethernet Transceiver
>
> This patch gives support to a standard design produced by EDK for this
> board: ppc440, uartlite, xilinx_int and flash
>
> - Includes Changes propossed by Stefan Roese and Michal Simek

Applied to next branch of u-boot-ppc4xx after some minor cleanups.

Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================