From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefan Roese <sr@denx.de>
Date: Thu, 7 Aug 2008 12:09:38 +0200
Subject: [U-Boot-Users] [PATCH] Sequoia has two UARTs in "4-pin" mode.
	Configure the GPIOs as per schematic.
In-Reply-To: <4899FEBC.3050309@harris.com>
References: <4899FEBC.3050309@harris.com>
Message-ID: <200808071209.38651.sr@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Wednesday 06 August 2008, Steven A. Falco wrote:
> The Sequoia board has two UARTs in "4-pin" mode.  This patch modifies the
> GPIO configuration to match the schematic, and also sets the sdr0_pfc1
> register to select the corresponding mode for the UARTs.
>
>  board/amcc/sequoia/sequoia.c |    5 +++++
>  include/configs/sequoia.h    |   12 ++++++------
>  2 files changed, 11 insertions(+), 6 deletions(-)
>
> Signed-off-by: Steven A. Falco <sfalco@harris.com>

Applied to u-boot-ppc4xx repository. Thanks.

Note that your s-o-b line should be *above* the patch statistics. Did you 
generate this patch using git-format-patch?

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================