From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefan Roese <sr@denx.de>
Date: Mon, 11 Aug 2008 06:49:38 +0200
Subject: [U-Boot] [U-Boot-Users] [PATCH] Sequoia has two UARTs in
	"4-pin" mode. Configure the GPIOs as per schematic.
In-Reply-To: <20080810221145.E0E79248AC@gemini.denx.de>
References: <4899FEBC.3050309@harris.com> <200808071209.38651.sr@denx.de>
	<20080810221145.E0E79248AC@gemini.denx.de>
Message-ID: <200808110649.38615.sr@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Wolfgang,

On Monday 11 August 2008, Wolfgang Denk wrote:
> > On Wednesday 06 August 2008, Steven A. Falco wrote:
> > > The Sequoia board has two UARTs in "4-pin" mode.  This patch modifies
> > > the GPIO configuration to match the schematic, and also sets the
> > > sdr0_pfc1 register to select the corresponding mode for the UARTs.
> > >
> > >  board/amcc/sequoia/sequoia.c |    5 +++++
> > >  include/configs/sequoia.h    |   12 ++++++------
> > >  2 files changed, 11 insertions(+), 6 deletions(-)
> > >
> > > Signed-off-by: Steven A. Falco <sfalco@harris.com>
> >
> > Applied to u-boot-ppc4xx repository. Thanks.
>
> Hmmm... I'm still waiting for your pull request?

I thought since I already missed the Friday deadline it was too late. OK, pull 
request will follow directly.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================