From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] ppc4xx: AMCC PPC460GT/EX PCI-E de-emphasis adjustment fix
Date: Fri, 22 Aug 2008 21:41:16 +0200 [thread overview]
Message-ID: <200808222141.16391.sr@denx.de> (raw)
In-Reply-To: <AC5E1C3367E37D44970B81A6ADD1DA2C05D79282@SDCEXCHANGE01.ad.amcc.com>
Hi Marri,
On Friday 22 August 2008, Tirumala Reddy Marri wrote:
> There were silent corruptions I noticed during a RAID-5 test using
> silicon image card. Then I hooked up a analyzer and found that eye
> diagram was not wide enough. After reducing the de-emphasis value I
> noticed better eye diagram. Also I ran 72 hour test which was successful
> to see if there are any corruptions .
Did you run this on a Canyonlands? If yes, which PCIe slot did you use?
> Even though these de-emphasis values are only applicable to Linux. I
> wanted to make sure both Linux and u-boot are in sync.
Yes, makes perfect sense. I'll push this into my repository later.
Thanks.
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
prev parent reply other threads:[~2008-08-22 19:41 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-22 4:54 [U-Boot] [PATCH] ppc4xx: AMCC PPC460GT/EX PCI-E de-emphasis adjustment fix fkan at amcc.com
2008-08-22 8:41 ` Stefan Roese
2008-08-22 16:13 ` Tirumala Reddy Marri
2008-08-22 19:41 ` Stefan Roese [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200808222141.16391.sr@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox