From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefan Roese <sr@denx.de>
Date: Mon, 25 Aug 2008 09:29:33 +0200
Subject: [U-Boot] [Question about ppc4xx]
In-Reply-To: <000501c90501$433d3240$c9b796c0$@com>
References: <000501c90501$433d3240$c9b796c0$@com>
Message-ID: <200808250929.33780.sr@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Saturday 23 August 2008, ??? wrote:
> I'm working on my custum board based on SEQUOIA.
>
> I'd like to use SPI & IIC in my linux application.

First this is the wrong mailing list then. Its about U-Boot questions and you 
are asking about Linux I2C and SPI support. I suggest you move this over to 
linuxppc-dev.

> Where should I start??
>
> Do I have to make my own driver to read & write via SPI & IIC??
>
> Or, are there any usefull drivers in the kernel or somewhere??
>
> If it is, how can I use them?
>
>
>
> If you have sample code, would you give me them??

To give you a quick answer to your questions: I2C is supported for 4xx in the 
current Linux kernel. SPI is still missing but I'm currently busy with 
integrating the 4xx SPI support and pushing it upstream. In a few days/weeks 
you should see something on the lists.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================