From mboxrd@z Thu Jan 1 00:00:00 1970 From: Markus =?iso-8859-1?Q?Klotzb=FCcher?= Date: Wed, 3 Sep 2008 09:02:34 +0200 Subject: [U-Boot] [U-Boot-Users] [PATCH 1/4][RFC] Add initial high speed support to USB code. In-Reply-To: References: <1214220277-25624-1-git-send-email-tor@excito.com> Message-ID: <20080903070234.GA20344@lisa> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Tor, On Thu, Jul 10, 2008 at 05:22:18PM +0200, Tor Krill wrote: > On 7/10/2008, "Markus Klotzb?cher" wrote: > >Tor Krill writes: > > > >> Add high speed support to USB code. Extracted from Juniper Networks patch. > >> > >> I know that the mergewindow is closed but wanted to get feedback on these > >> patches if possible. > > > >Thanks again for fixing this up. AFAIK patches look fine, only two > > things: > > > >- please address the issues pointed out by Michael, especially removal > > of the "C" macro. > > > >- Secondly it would be nice if we could have a short README.ehci or > > similar which explains what works and what not, and what needs to be > > done to add further board/HC support. > > > >Thank you in advance. > > Thank you for reviewing. I will try fix things up and resubmit > later. Any news about this? I'd very much like to get your patches merged... Best regards Markus Klotzb?cher -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de")