From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfgang Denk Date: Sun, 07 Sep 2008 01:15:40 +0200 Subject: [U-Boot] [PATCH] ads5121: Set offset of NFC registers in device tree. In-Reply-To: <4b73d43f0809041821g3bada7d5i98954bd6f966f1e2@mail.gmail.com> References: <1220391700-2155-1-git-send-email-wd@denx.de> <4b73d43f0809030759g123d5146lc9eb5348799b1838@mail.gmail.com> <20080903204132.25749248A0@gemini.denx.de> <1220516029.31338.6.camel@localhost.localdomain> <20080904150516.GA2583@ld0162-tx32.am.freescale.net> <4b73d43f0809041821g3bada7d5i98954bd6f966f1e2@mail.gmail.com> Message-ID: <20080906231540.E6F11248BB@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear John Rigby, In message <4b73d43f0809041821g3bada7d5i98954bd6f966f1e2@mail.gmail.com> you wrote: > I agree, here are the two device tree entries: > Original silicon rev 1 and 1.5: > compatible = "fsl,mpc5121-nfc"; > rev 2: > compatible = "fsl,mpc5121rev2-nfc"; Actually I woner it it makes sense at all to attempt to support the old (pre-rev. 2 silicon based) hardware at all in newer versions of U-Boot and Linux. There are only a few boards out in the field, and those of the customers who are actually doing any work on them will replace them by new hardware anyway. The others can stick as well with the existing U-Boot and Linux support. I vote to support only rev. 2 (and later) silicon in recent versions of U-Boot and Linux. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de An optimist believes we live in the best world possible; a pessimist fears this is true.