From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefan Roese <sr@denx.de>
Date: Wed, 10 Sep 2008 17:09:17 +0200
Subject: [U-Boot] [PATCH v2] ppc4xx: Allow DTT_I2C_DEV_CODE configured
	by CFG_I2C_DTT_ADDR
In-Reply-To: <0CA0A16855646F4FA96D25A158E299D602C81362@SDCEXCHANGE01.ad.amcc.com>
References: <1220998409-26390-1-git-send-email-vgallardo@amcc.com>
	<200809100450.03234.sr@denx.de>
	<0CA0A16855646F4FA96D25A158E299D602C81362@SDCEXCHANGE01.ad.amcc.com>
Message-ID: <200809101709.17365.sr@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Wednesday 10 September 2008, Victor Gallardo wrote:
> >> On AMCC Arches board DTT_I2C_DEV_CODE is different then canyonlands and
> >> glacier.
> >
> >This patch is not really ppc4xx related, so please replace the "ppc4xx:"
> > from the subject line with "DTT:".
> >
> >Other than this:
> >
> >Acked-by: Stefan Roese sr at denx.de
>
> You are correct. I should have used DTT instead. Sorry about that.

No problem.

> Wolfgang has accepted in his tree. Do I still need to resubmit to get it in
> your tree?

No, its ok. But please use the correct subject next time.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================