From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Roese Date: Wed, 17 Sep 2008 06:00:21 +0200 Subject: [U-Boot] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git In-Reply-To: <20080916203632.83AEC248FE@gemini.denx.de> References: <200809162019.27303.sr@denx.de> <20080916203632.83AEC248FE@gemini.denx.de> Message-ID: <200809170600.21510.sr@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Wolfgang, On Tuesday 16 September 2008, Wolfgang Denk wrote: > > The following changes since commit > > c0d2f87d6c450128b88e73eea715fa3654f65b6c: Wolfgang Denk (1): > > Prepare v2008.10-rc2 > > > > are available in the git repository at: > > > > git://www.denx.de/git/u-boot-ppc4xx.git master > > > > Victor Gallardo (1): > > ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz (200MHz PLB) > > I'm not really happy abouthtis. I'm not either. > AS I understand, this is just a > temporary patch including a workaround for aproblem that is not yet > understood. Correct. > We are not under preassure yet in terms of release schedule. AMCC wants to ship the new 600MHz boards. This version at least works compared to the current version which turns those boards into bricks, since it doesn't bootup into the U-Boot prompt. So it definitely is an improvement. > Wouldn't it be better to delay this until we have the final patch > without such a workaround? I was hesitating here too, but I think its good enough to include this patch now. It definitely is a temporary fix and I hope that AMCC provides a "better", final patch that fixes this problem soon. Problem is that nobody knows how long this could take. But in the end it's your call. If you reject this patch as is, then I'll revert it in my repository. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================