From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfgang Denk Date: Tue, 23 Sep 2008 23:03:31 +0200 Subject: [U-Boot] Uboot-1.2.0 on MPC8360EMDS board In-Reply-To: <5c9cd53b0809231157qd73f6e5kd73a5a0a80d1f525@mail.gmail.com> References: <5c9cd53b0809231156o3c24c053y26861d8f1cf24a93@mail.gmail.com> <5c9cd53b0809231157qd73f6e5kd73a5a0a80d1f525@mail.gmail.com> Message-ID: <20080923210331.CFEFA24844@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Mike, In message <5c9cd53b0809231157qd73f6e5kd73a5a0a80d1f525@mail.gmail.com> you wrote: > > I am having problem when I try to bootup MPC8360EMDS with Uboot1.2. > The following are logs. The board reboot when the uboot tried to run > on the RAM. Any idea on this issue? ... > U-Boot 1.2.1 (Sep 23 2008 - 14:35:42) MPC83XX It's difficult to say anything when ewven the minimal information you provide is unreliable - the subject says "Uboot-1.2.0", later you write "Uboot1.2", and now we see "U-Boot 1.2.1". I think you should know exactly which version you ar running. In any case: all of these versions are extremely old. Please use current code instead. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "The X11 source code style is ATROCIOUS and should not be used as a model." - Doug Gwyn