From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/5] mpc83xx: fix serdes setup for the MPC8378E boards
Date: Tue, 30 Sep 2008 20:27:29 +0400 [thread overview]
Message-ID: <20080930162729.GA12032@oksana.dev.rtsoft.ru> (raw)
MPC837xE specs says that SerDes1 has:
? Two lanes running x1 SGMII at 1.25 Gbps;
? Two lanes running x1 SATA at 1.5 or 3.0 Gbps.
And for SerDes2:
? Two lanes running x1 PCI Express at 2.5 Gbps;
? One lane running x2 PCI Express at 2.5 Gbps;
? Two lanes running x1 SATA at 1.5 or 3.0 Gbps.
The spec also explicitly states that PEX options are not valid for
the SD1.
Nevertheless MPC8378 RDB and MDS boards configure the SD1 for PEX,
which is wrong to do.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
board/freescale/mpc837xemds/mpc837xemds.c | 2 +-
board/freescale/mpc837xerdb/mpc837xerdb.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/freescale/mpc837xemds/mpc837xemds.c b/board/freescale/mpc837xemds/mpc837xemds.c
index 40f1e63..581397d 100644
--- a/board/freescale/mpc837xemds/mpc837xemds.c
+++ b/board/freescale/mpc837xemds/mpc837xemds.c
@@ -44,7 +44,7 @@ int board_early_init_f(void)
FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
break;
case SPR_8378:
- fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_PEX,
+ fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX,
FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
break;
case SPR_8379:
diff --git a/board/freescale/mpc837xerdb/mpc837xerdb.c b/board/freescale/mpc837xerdb/mpc837xerdb.c
index aaefc18..3eb53d8 100644
--- a/board/freescale/mpc837xerdb/mpc837xerdb.c
+++ b/board/freescale/mpc837xerdb/mpc837xerdb.c
@@ -148,7 +148,7 @@ int board_early_init_f(void)
FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
break;
case SPR_8378:
- fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_PEX,
+ fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX,
FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
break;
case SPR_8379:
--
1.5.6.3
reply other threads:[~2008-09-30 16:27 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080930162729.GA12032@oksana.dev.rtsoft.ru \
--to=avorontsov@ru.mvista.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox