From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] mpc83xx: fix PCI scan hang on the standalone MPC837xE-MDS boards
Date: Thu, 2 Oct 2008 19:17:33 +0400 [thread overview]
Message-ID: <20081002151733.GA8589@oksana.dev.rtsoft.ru> (raw)
The MPC837xE-MDS board's CPLD can auto-detect if the board is on the PIB,
standalone or acting as a PCI agent. User's Guide says:
- When the CPLD recognizes its location on the PIB it automatically
configures RCW to the PCI Host.
- If the CPLD fails to recognize its location then it is automatically
configured as an Agent and the PCI is configured to an external arbiter.
This sounds good. Though in the standalone setup the CPLD sets PCI_HOST
flag (it's ok, we can't act as PCI agents since we receive CLKIN, not
PCICLK), but the CPLD doesn't set the ARBITER_ENABLE flag, and without
any arbiter bad things will happen (here the board hangs during any config
space reads).
In this situation we must disable the PCI. And in case of anybody really
want to use an external arbiter, we provide "pci_external_aribter"
environment variable.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
board/freescale/mpc837xemds/mpc837xemds.c | 41 +++++++++++++++++++++++++++++
board/freescale/mpc837xemds/pci.c | 3 ++
include/configs/MPC837XEMDS.h | 3 ++
3 files changed, 47 insertions(+), 0 deletions(-)
diff --git a/board/freescale/mpc837xemds/mpc837xemds.c b/board/freescale/mpc837xemds/mpc837xemds.c
index b6b9678..8bc54d1 100644
--- a/board/freescale/mpc837xemds/mpc837xemds.c
+++ b/board/freescale/mpc837xemds/mpc837xemds.c
@@ -270,6 +270,45 @@ int checkboard(void)
return 0;
}
+#ifdef CONFIG_PCI
+int board_pci_host_broken(void)
+{
+ struct immap __iomem *im = (struct immap __iomem *)CFG_IMMR;
+ const u32 rcw_mask = HRCWH_PCI1_ARBITER_ENABLE | HRCWH_PCI_HOST;
+ const char *pci_ea = getenv("pci_external_arbiter");
+
+ /* It's always OK in case of external arbiter. */
+ if (pci_ea && !strcmp(pci_ea, "yes"))
+ return 0;
+
+ if ((in_be32(&im->reset.rcwh) & rcw_mask) != rcw_mask)
+ return 1;
+
+ return 0;
+}
+
+static void ft_pci_fixup(void *blob, bd_t *bd)
+{
+ const char *status = "broken (no arbiter)";
+ int off;
+ int err;
+
+ off = fdt_path_offset(blob, "pci0");
+ if (off < 0) {
+ printf("WARNING: could not find pci0 alias: %s.\n",
+ fdt_strerror(off));
+ return;
+ }
+
+ err = fdt_setprop(blob, off, "status", status, strlen(status) + 1);
+ if (err) {
+ printf("WARNING: could not set status for pci0: %s.\n",
+ fdt_strerror(err));
+ return;
+ }
+}
+#endif
+
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{
@@ -277,6 +316,8 @@ void ft_board_setup(void *blob, bd_t *bd)
ft_tsec_fixup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
+ if (board_pci_host_broken())
+ ft_pci_fixup(blob, bd);
#endif
}
#endif /* CONFIG_OF_BOARD_SETUP */
diff --git a/board/freescale/mpc837xemds/pci.c b/board/freescale/mpc837xemds/pci.c
index ab90979..0eba7df 100644
--- a/board/freescale/mpc837xemds/pci.c
+++ b/board/freescale/mpc837xemds/pci.c
@@ -47,6 +47,9 @@ void pci_init_board(void)
volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
struct pci_region *reg[] = { pci_regions };
+ if (board_pci_host_broken())
+ return;
+
/* Enable all 5 PCI_CLK_OUTPUTS */
clk->occr |= 0xf8000000;
udelay(2000);
diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index ed70b9e..adf7c8c 100644
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -347,6 +347,9 @@
#define CFG_PCI_SLV_MEM_SIZE 0x80000000
#ifdef CONFIG_PCI
+#ifndef __ASSEMBLY__
+extern int board_pci_host_broken(void);
+#endif
#define CONFIG_83XX_GENERIC_PCI 1 /* Use generic PCI setup */
#define CONFIG_PQ_MDS_PIB 1 /* PQ MDS Platform IO Board */
--
1.5.6.3
next reply other threads:[~2008-10-02 15:17 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-02 15:17 Anton Vorontsov [this message]
2008-10-09 5:01 ` [U-Boot] [PATCH] mpc83xx: fix PCI scan hang on the standaloneMPC837xE-MDS boards Liu Dave-R63238
2008-10-09 10:08 ` Anton Vorontsov
2008-10-14 0:26 ` [U-Boot] [PATCH] mpc83xx: fix PCI scan hang on the standalone MPC837xE-MDS boards Kim Phillips
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081002151733.GA8589@oksana.dev.rtsoft.ru \
--to=avorontsov@ru.mvista.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox