From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfgang Denk Date: Tue, 14 Oct 2008 16:07:09 +0200 Subject: [U-Boot] [PATCH 4/4] Do not init SATA when disabled on 8536DS. In-Reply-To: <62E86B44-4E2A-4356-BD81-A0D014AB591E@kernel.crashing.org> References: <1223610061-5348-1-git-send-email-Jason.jin@freescale.com> <1223610061-5348-2-git-send-email-Jason.jin@freescale.com> <1223610061-5348-3-git-send-email-Jason.jin@freescale.com> <1223610061-5348-4-git-send-email-Jason.jin@freescale.com> <62E86B44-4E2A-4356-BD81-A0D014AB591E@kernel.crashing.org> Message-ID: <20081014140709.847C081C99CC@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Kumar Gala, In message <62E86B44-4E2A-4356-BD81-A0D014AB591E@kernel.crashing.org> you wrote: > > On Oct 9, 2008, at 10:41 PM, Jason Jin wrote: > > > SGMII and SATA share the serdes on MPC8536 CPU, When SATA disabled > > and the > > driver still try to access the SATA registers, the cpu will hangup. > > This patch try to fix this by reading the serdes status before the > > SATA > > initialize. > > > > Signed-off-by: Jason Jin > > --- > > board/freescale/mpc8536ds/mpc8536ds.c | 12 ++++++++++++ > > lib_ppc/board.c | 16 ++++++++++++++-- > > 2 files changed, 26 insertions(+), 2 deletions(-) > > Wolfgang, I think this was a patch for v2008.10.. Andy was looking for > you to ack or apply. It was on my to-do list. Thanks for the reminder. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "It is better to have tried and failed than to have failed to try, but the result's the same." - Mike Dennison