[U-Boot] [PATCH PPC_4xx V3] Print simple row of dots instead of spinning wheel

[Stefan Roese <sr@denx.de>]

Hi Wolfgang,

On Friday 31 October 2008, Wolfgang Denk wrote:
> > > It is my understanding that a rework of this code is under way  which
> > > will  avoid  the  long delay for the standard boot sequence (and only
> > > need it for board bringup or  intentional  recalibration).
> >
> > Are you talking about storing the optimized autocalibration values in
> > FLASH, as discussed on IRC some time ago? I don't know if somebody is
> > working on
>
> Yes. I see this as a mandatory requirement. The additional delays are
> not aceptable.

I just want to raise some concerns about this approach on boards with DIMM 
modules. Here it will be hard to determine if a new DIMM module is installed. 
Even a module from the same manufacturer and type (size, width etc, all the 
same) will need a new autocalibration. This is probably hard to detect.

Just my $0.02.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================