[U-Boot] [PATCH 00/13 v5] ARM: OMAP3: Add support for some of TIs ARM-Cortex A8 OMAP3 boards

[Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>]

On 19:34 Sun 02 Nov     , dirk.behme at googlemail.com wrote:
> Subject: [PATCH 00/13 v5] ARM: OMAP3: Add support for some of TIs ARM-Cortex A8 OMAP3 boards
> 
> This patch series adds U-Boot v1 support for some of TI's ARM-Cortex A8 based OMAP3 boards. These are BeagleBoard [1][2], EVM [3] and Overo [4].
> 
> The patch series is based on U-Boot tar ball [5] for BeagleBoard and EVM done by several TI employees.
> 
> To be able to easily add new boards, most of the code is common for all boards. After the header files (patches 1-2) and the common code for ARM Cortex A8 (patch 3) and OMAP3 SoC (patches 4-6), support and drivers for NAND, MMC and I2C is added (patches 7-9). Patches 10-12 introduce the individual board support for Beagle, EVM and Overo, and last patch 13 the config files for these boards. 
> 
> As discussed earlier on this list, we compile for armv5 to be compatible with existing toolchains.
> 
> This patch adds ~300k of new code.
> 
> Thanks to
> 
> Steve Sakoman <sakoman@gmail.com>
> Pillai, Manikandan <mani.pillai@ti.com>
> Syed Mohammed, Khasim <khasim@ti.com>
> Nishanth Menon <nm@ti.com>
> 
> and all others who helped with this.

As planned patch set applied to omap3 branch

Best Regards,
J.