public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
* [U-Boot] [PATCH 1/3] Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
@ 2008-10-30  5:56 Ben Warren
  2008-10-30  5:56 ` [U-Boot] [PATCH 2/3] Moved PPC4xx EMAC driver to drivers/net Ben Warren
  2008-10-31 10:16 ` [U-Boot] [PATCH 1/3] Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC Stefan Roese
  0 siblings, 2 replies; 6+ messages in thread
From: Ben Warren @ 2008-10-30  5:56 UTC (permalink / raw)
  To: u-boot

All in-tree IBM/AMCC PPC4xx boards using the EMAC get this new CONFIG

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
---
 cpu/ppc4xx/4xx_enet.c            |    9 ---------
 cpu/ppc4xx/Makefile              |    1 +
 include/configs/AR405.h          |    1 +
 include/configs/ASH405.h         |    1 +
 include/configs/CMS700.h         |    1 +
 include/configs/CPCI405.h        |    1 +
 include/configs/CPCI4052.h       |    1 +
 include/configs/CPCI405AB.h      |    1 +
 include/configs/CPCI405DT.h      |    1 +
 include/configs/CPCIISER4.h      |    1 +
 include/configs/CRAYL1.h         |    2 ++
 include/configs/DP405.h          |    1 +
 include/configs/DU405.h          |    1 +
 include/configs/DU440.h          |    1 +
 include/configs/ERIC.h           |    1 +
 include/configs/EXBITGEN.h       |    1 +
 include/configs/G2000.h          |    1 +
 include/configs/HH405.h          |    1 +
 include/configs/HUB405.h         |    1 +
 include/configs/JSE.h            |    1 +
 include/configs/KAREF.h          |    1 +
 include/configs/METROBOX.h       |    1 +
 include/configs/MIP405.h         |    1 +
 include/configs/OCRTC.h          |    1 +
 include/configs/ORSG.h           |    1 +
 include/configs/PCI405.h         |    1 +
 include/configs/PIP405.h         |    1 +
 include/configs/PLU405.h         |    1 +
 include/configs/PMC405.h         |    1 +
 include/configs/PMC440.h         |    1 +
 include/configs/PPChameleonEVB.h |    1 +
 include/configs/VOH405.h         |    1 +
 include/configs/VOM405.h         |    1 +
 include/configs/W7OLMC.h         |    1 +
 include/configs/W7OLMG.h         |    1 +
 include/configs/WUH405.h         |    1 +
 include/configs/XPEDITE1K.h      |    1 +
 include/configs/alpr.h           |    1 +
 include/configs/amcc-common.h    |    1 +
 include/configs/csb272.h         |    1 +
 include/configs/csb472.h         |    1 +
 include/configs/korat.h          |    1 +
 include/configs/lwmon5.h         |    1 +
 include/configs/netstal-common.h |    1 +
 include/configs/p3p440.h         |    1 +
 include/configs/pcs440ep.h       |    1 +
 include/configs/quad100hd.h      |    1 +
 include/configs/sbc405.h         |    1 +
 include/configs/sc3.h            |    2 ++
 include/configs/zeus.h           |    1 +
 net/eth.c                        |    5 ++---
 51 files changed, 53 insertions(+), 12 deletions(-)

diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c
index d7b16da..1978269 100644
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -91,13 +91,6 @@
 #include <miiphy.h>
 #include <malloc.h>
 
-/*
- * Only compile for platform with AMCC EMAC ethernet controller and
- * network support enabled.
- * Remark: CONFIG_405 describes Xilinx PPC405 FPGA without EMAC controller!
- */
-#if defined(CONFIG_CMD_NET) && !defined(CONFIG_405) && !defined(CONFIG_IOP480)
-
 #if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII))
 #error "CONFIG_MII has to be defined!"
 #endif
@@ -2131,5 +2124,3 @@ int emac4xx_miiphy_initialize (bd_t * bis)
 	return 0;
 }
 #endif /* !defined(CONFIG_NET_MULTI) */
-
-#endif
diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile
index 463b575..adfe13c 100644
--- a/cpu/ppc4xx/Makefile
+++ b/cpu/ppc4xx/Makefile
@@ -38,6 +38,7 @@ COBJS	+= 44x_spd_ddr2.o
 ifdef CONFIG_PPC4xx_DDR_AUTOCALIBRATION
 COBJS	+= 4xx_ibm_ddr2_autocalib.o
 endif
+COBJS-$(CONFIG_PPC4xx_EMAC) += 4xx_enet.o
 COBJS	+= 4xx_pci.o
 COBJS	+= 4xx_pcie.o
 COBJS	+= bedbug_405.o
diff --git a/include/configs/AR405.h b/include/configs/AR405.h
index 864774c..9f19269 100644
--- a/include/configs/AR405.h
+++ b/include/configs/AR405.h
@@ -67,6 +67,7 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h
index bcc85ee..a694083 100644
--- a/include/configs/ASH405.h
+++ b/include/configs/ASH405.h
@@ -56,6 +56,7 @@
 #define CONFIG_NET_MULTI	1
 #undef  CONFIG_HAS_ETH1
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h
index d58f508..d0e2464 100644
--- a/include/configs/CMS700.h
+++ b/include/configs/CMS700.h
@@ -52,6 +52,7 @@
 
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_NET_MULTI	1
 #undef  CONFIG_HAS_ETH1
 
diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h
index 3493d75..1a2bc1c 100644
--- a/include/configs/CPCI405.h
+++ b/include/configs/CPCI405.h
@@ -52,6 +52,7 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h
index 734ab95..e231fa7 100644
--- a/include/configs/CPCI4052.h
+++ b/include/configs/CPCI4052.h
@@ -54,6 +54,7 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h
index 47ad89d..2319c58 100644
--- a/include/configs/CPCI405AB.h
+++ b/include/configs/CPCI405AB.h
@@ -54,6 +54,7 @@
 #undef	CONFIG_LOADS_ECHO		/* echo on for serial download	*/
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h
index 4e94dfc..be8c238 100644
--- a/include/configs/CPCI405DT.h
+++ b/include/configs/CPCI405DT.h
@@ -53,6 +53,7 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
diff --git a/include/configs/CPCIISER4.h b/include/configs/CPCIISER4.h
index 2d60ebf..3263712 100644
--- a/include/configs/CPCIISER4.h
+++ b/include/configs/CPCIISER4.h
@@ -50,6 +50,7 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h
index 1122d02..f1608e1 100644
--- a/include/configs/CRAYL1.h
+++ b/include/configs/CRAYL1.h
@@ -39,6 +39,8 @@
 #define CONFIG_SYS_CLK_FREQ 25000000
 #define CONFIG_BAUDRATE		9600
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		    1	/* MII PHY management */
 #define	CONFIG_PHY_ADDR		1	/* PHY address; handling of ENET */
 #define CONFIG_BOARD_EARLY_INIT_F 1	/* early setup for 405gp */
diff --git a/include/configs/DP405.h b/include/configs/DP405.h
index 0ff4f7d..884f3fe 100644
--- a/include/configs/DP405.h
+++ b/include/configs/DP405.h
@@ -52,6 +52,7 @@
 
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 
diff --git a/include/configs/DU405.h b/include/configs/DU405.h
index 939e216..1d20efe 100644
--- a/include/configs/DU405.h
+++ b/include/configs/DU405.h
@@ -54,6 +54,7 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
diff --git a/include/configs/DU440.h b/include/configs/DU440.h
index 508a0ca..729153c 100644
--- a/include/configs/DU440.h
+++ b/include/configs/DU440.h
@@ -253,6 +253,7 @@
 int du440_phy_addr(int devnum);
 #endif
 
+#define CONFIG_PPC4xx_EMAC
 #define	CONFIG_IBM_EMAC4_V4	1
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		du440_phy_addr(0) /* PHY address	*/
diff --git a/include/configs/ERIC.h b/include/configs/ERIC.h
index c05945a..1b766a7 100644
--- a/include/configs/ERIC.h
+++ b/include/configs/ERIC.h
@@ -93,6 +93,7 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		1	/* PHY address			*/
 
diff --git a/include/configs/EXBITGEN.h b/include/configs/EXBITGEN.h
index 9f5d3ca..1dd6e57 100644
--- a/include/configs/EXBITGEN.h
+++ b/include/configs/EXBITGEN.h
@@ -88,6 +88,7 @@
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 #define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
diff --git a/include/configs/G2000.h b/include/configs/G2000.h
index 4341f02..d299044 100644
--- a/include/configs/G2000.h
+++ b/include/configs/G2000.h
@@ -80,6 +80,7 @@
 
 #define CONFIG_NET_MULTI	1
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_PHY1_ADDR	1	/* PHY address			*/
diff --git a/include/configs/HH405.h b/include/configs/HH405.h
index 1e7cc12..80e59bb 100644
--- a/include/configs/HH405.h
+++ b/include/configs/HH405.h
@@ -64,6 +64,7 @@
 
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_NET_MULTI	1
 #undef  CONFIG_HAS_ETH1
 
diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h
index 3e58424..b3c7046 100644
--- a/include/configs/HUB405.h
+++ b/include/configs/HUB405.h
@@ -54,6 +54,7 @@
 
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
diff --git a/include/configs/JSE.h b/include/configs/JSE.h
index 508b5c8..8aca1f9 100644
--- a/include/configs/JSE.h
+++ b/include/configs/JSE.h
@@ -132,6 +132,7 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		1	/* PHY address			*/
 
diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h
index 403081d..4b67c94 100644
--- a/include/configs/KAREF.h
+++ b/include/configs/KAREF.h
@@ -157,6 +157,7 @@
 /*-----------------------------------------------------------------------
  * Networking
  *----------------------------------------------------------------------*/
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII	      1		     /* MII PHY management	*/
 #define CONFIG_NET_MULTI      1
 #define CONFIG_PHY_ADDR	      0xff	     /* no phy on EMAC0		*/
diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h
index c0ddd45..518173a 100644
--- a/include/configs/METROBOX.h
+++ b/include/configs/METROBOX.h
@@ -221,6 +221,7 @@
 /*-----------------------------------------------------------------------
  * Networking
  *----------------------------------------------------------------------*/
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII	      1		     /* MII PHY management	*/
 #define CONFIG_NET_MULTI      1
 #define CONFIG_PHY_ADDR	      0xff	     /* no phy on EMAC0		*/
diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index 7dcf185..c58ce05 100644
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -336,6 +336,7 @@
 /************************************************************
  * Ethernet Stuff
  ***********************************************************/
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		1	/* PHY address			*/
 #define CONFIG_PHY_RESET_DELAY	300	/* Intel LXT971A needs this */
diff --git a/include/configs/OCRTC.h b/include/configs/OCRTC.h
index ff11df9..32814d4 100644
--- a/include/configs/OCRTC.h
+++ b/include/configs/OCRTC.h
@@ -50,6 +50,7 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
diff --git a/include/configs/ORSG.h b/include/configs/ORSG.h
index a635fca..58e9328 100644
--- a/include/configs/ORSG.h
+++ b/include/configs/ORSG.h
@@ -50,6 +50,7 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h
index b55e383..0393366 100644
--- a/include/configs/PCI405.h
+++ b/include/configs/PCI405.h
@@ -63,6 +63,7 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 
diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index 2966979..5c4d69b 100644
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -278,6 +278,7 @@
 /************************************************************
  * Ethernet Stuff
  ***********************************************************/
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		1	/* PHY address			*/
 /************************************************************
diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h
index 675dbe6..11ce008 100644
--- a/include/configs/PLU405.h
+++ b/include/configs/PLU405.h
@@ -54,6 +54,7 @@
 #define CONFIG_NET_MULTI	1
 #undef  CONFIG_HAS_ETH1
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h
index 12e63b7..8d07d77 100644
--- a/include/configs/PMC405.h
+++ b/include/configs/PMC405.h
@@ -56,6 +56,7 @@
 #define CONFIG_NET_MULTI	1
 #undef  CONFIG_HAS_ETH1
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h
index 85342a6..841985c 100644
--- a/include/configs/PMC440.h
+++ b/include/configs/PMC440.h
@@ -299,6 +299,7 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download  */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change        */
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_IBM_EMAC4_V4	1
 #define CONFIG_MII		1	/* MII PHY management           */
 #define CONFIG_PHY_ADDR		0	/* PHY address, See schematics  */
diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index e66f8ef..09a9641 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -104,6 +104,7 @@
 #undef CONFIG_EXT_PHY
 #define CONFIG_NET_MULTI	1
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #ifndef	 CONFIG_EXT_PHY
 #define CONFIG_PHY_ADDR		1	/* EMAC0 PHY address		*/
diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h
index fb1febc..10ef620 100644
--- a/include/configs/VOH405.h
+++ b/include/configs/VOH405.h
@@ -55,6 +55,7 @@
 #define CONFIG_NET_MULTI	1
 #undef  CONFIG_HAS_ETH1
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
diff --git a/include/configs/VOM405.h b/include/configs/VOM405.h
index b6e3588..90efc6d 100644
--- a/include/configs/VOM405.h
+++ b/include/configs/VOM405.h
@@ -53,6 +53,7 @@
 #define CONFIG_NET_MULTI	1
 #undef  CONFIG_HAS_ETH1
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h
index e546369..51d0a0a 100644
--- a/include/configs/W7OLMC.h
+++ b/include/configs/W7OLMC.h
@@ -65,6 +65,7 @@
 #define CONFIG_LOADS_ECHO	1		/* echo on for serial download	*/
 #undef CONFIG_SYS_LOADS_BAUD_CHANGE			/* disallow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1		/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0		/* PHY address			*/
 
diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h
index 2260338..ca1a9d4 100644
--- a/include/configs/W7OLMG.h
+++ b/include/configs/W7OLMG.h
@@ -65,6 +65,7 @@
 #define CONFIG_LOADS_ECHO	1		/* echo on for serial download	*/
 #undef CONFIG_SYS_LOADS_BAUD_CHANGE			/* disallow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1		/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0		/* PHY address			*/
 
diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h
index ec81564..01cdf3a 100644
--- a/include/configs/WUH405.h
+++ b/include/configs/WUH405.h
@@ -54,6 +54,7 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
diff --git a/include/configs/XPEDITE1K.h b/include/configs/XPEDITE1K.h
index 569bb90..8d44ec6 100644
--- a/include/configs/XPEDITE1K.h
+++ b/include/configs/XPEDITE1K.h
@@ -167,6 +167,7 @@ extern void out32(unsigned int, unsigned long);
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII			1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address phy0 not populated */
 #define CONFIG_PHY1_ADDR	1	/* PHY address phy1 not populated */
diff --git a/include/configs/alpr.h b/include/configs/alpr.h
index 3158412..6e9f5e5 100644
--- a/include/configs/alpr.h
+++ b/include/configs/alpr.h
@@ -198,6 +198,7 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_NET_MULTI	1
 #define CONFIG_PHY_ADDR		0x02	/* dummy setting, no EMAC0 used	*/
diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h
index 8516571..d3dc3e5 100644
--- a/include/configs/amcc-common.h
+++ b/include/configs/amcc-common.h
@@ -45,6 +45,7 @@
 /*
  * Ethernet/EMAC/PHY
  */
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII			/* MII PHY management		*/
 #define CONFIG_NET_MULTI
 #define CONFIG_NETCONSOLE		/* include NetConsole support	*/
diff --git a/include/configs/csb272.h b/include/configs/csb272.h
index 393e992..874f2c0 100644
--- a/include/configs/csb272.h
+++ b/include/configs/csb272.h
@@ -180,6 +180,7 @@
  * MII PHY configuration
  *
  */
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_PHY_CMD_DELAY	40	/* PHY COMMAND delay		*/
diff --git a/include/configs/csb472.h b/include/configs/csb472.h
index af38252..2e30e69 100644
--- a/include/configs/csb472.h
+++ b/include/configs/csb472.h
@@ -179,6 +179,7 @@
  * MII PHY configuration
  *
  */
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_PHY_CMD_DELAY	40	/* PHY COMMAND delay		*/
diff --git a/include/configs/korat.h b/include/configs/korat.h
index ca3e8a9..d56da14 100644
--- a/include/configs/korat.h
+++ b/include/configs/korat.h
@@ -215,6 +215,7 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_IBM_EMAC4_V4	1
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		2	/* PHY address, See schematics	*/
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index e0dbd61..05055c8 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -326,6 +326,7 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define	CONFIG_IBM_EMAC4_V4	1
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		3	/* PHY address, See schematics	*/
diff --git a/include/configs/netstal-common.h b/include/configs/netstal-common.h
index 1fa4b00..0a75794 100644
--- a/include/configs/netstal-common.h
+++ b/include/configs/netstal-common.h
@@ -58,6 +58,7 @@
 /*
  * Ethernet/EMAC/PHY
  */
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII			/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		1	/* PHY address			*/
 #if defined(CONFIG_440)
diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h
index 1dc8656..729ca6a 100644
--- a/include/configs/p3p440.h
+++ b/include/configs/p3p440.h
@@ -158,6 +158,7 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0x1c	/* PHY address			*/
 #define CONFIG_HAS_ETH1
diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h
index 6e2d906..000ae5c 100644
--- a/include/configs/pcs440ep.h
+++ b/include/configs/pcs440ep.h
@@ -218,6 +218,7 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_NET_MULTI        1	/* required for netconsole      */
 #define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"	*/
diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h
index 1a76301..0f7fca3 100644
--- a/include/configs/quad100hd.h
+++ b/include/configs/quad100hd.h
@@ -45,6 +45,7 @@
 #define CONFIG_ENV_IS_IN_EEPROM
 #undef CONFIG_ENV_IS_IN_FLASH
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_NET_MULTI	1
 #define CONFIG_HAS_ETH1		1
 #define CONFIG_MII		1	/* MII PHY management		*/
diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h
index d93ca2d..c156820 100644
--- a/include/configs/sbc405.h
+++ b/include/configs/sbc405.h
@@ -58,6 +58,7 @@
 #define CONFIG_BOOTCOMMAND      "version;echo;tftpboot ${loadaddr} ${loadfile};bootvx"      /* autoboot command     */
 
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_PHY_RESET_DELAY	300	/* Intel LXT971A needs this	*/
diff --git a/include/configs/sc3.h b/include/configs/sc3.h
index 44135df..d152a96 100644
--- a/include/configs/sc3.h
+++ b/include/configs/sc3.h
@@ -166,6 +166,8 @@
 /* #define CONFIG_EEPRO100_SROM_WRITE */
 /* #define CONFIG_SHOW_MAC */
 #define CONFIG_EEPRO100
+
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII 1			/* add 405GP MII PHY management		*/
 #define CONFIG_PHY_ADDR 1	/* the connected Phy defaults to address 1 */
 
diff --git a/include/configs/zeus.h b/include/configs/zeus.h
index b75e8a1..1a77c71 100644
--- a/include/configs/zeus.h
+++ b/include/configs/zeus.h
@@ -46,6 +46,7 @@
 
 #define CONFIG_OVERWRITE_ETHADDR_ONCE	1
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0x01	/* PHY address			*/
 #define CONFIG_HAS_ETH1		1
diff --git a/net/eth.c b/net/eth.c
index 0b954ed..eab5104 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -153,7 +153,7 @@ int eth_initialize(bd_t *bis)
 #if defined(CONFIG_DB64460) || defined(CONFIG_P3Mx)
 	mv6446x_eth_initialize(bis);
 #endif
-#if defined(CONFIG_4xx) && !defined(CONFIG_IOP480) && !defined(CONFIG_AP1000)
+#if defined(CONFIG_PPC4xx_EMAC)
 	ppc_4xx_eth_initialize(bis);
 #endif
 	if (!eth_devices) {
@@ -485,8 +485,7 @@ int eth_initialize(bd_t *bis)
 #if defined(CONFIG_AT91RM9200)
 	at91rm9200_miiphy_initialize(bis);
 #endif
-#if defined(CONFIG_4xx) && !defined(CONFIG_IOP480) \
-	&& !defined(CONFIG_AP1000) && !defined(CONFIG_405)
+#if defined(CONFIG_PPC4xx_EMAC)
 	emac4xx_miiphy_initialize(bis);
 #endif
 #if defined(CONFIG_MCF52x2)
-- 
1.5.4.3

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 2/3] Moved PPC4xx EMAC driver to drivers/net
  2008-10-30  5:56 [U-Boot] [PATCH 1/3] Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC Ben Warren
@ 2008-10-30  5:56 ` Ben Warren
  2008-10-30  5:56   ` [U-Boot] [PATCH 3/3] Moved initialization of PPC4xx EMAC to cpu_eth_init() Ben Warren
  2008-10-31 10:16 ` [U-Boot] [PATCH 1/3] Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC Stefan Roese
  1 sibling, 1 reply; 6+ messages in thread
From: Ben Warren @ 2008-10-30  5:56 UTC (permalink / raw)
  To: u-boot

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
---
 cpu/ppc4xx/Makefile                    |    1 -
 {cpu/ppc4xx => drivers/net}/4xx_enet.c |    0 
 drivers/net/Makefile                   |    1 +
 3 files changed, 1 insertions(+), 1 deletions(-)
 rename {cpu/ppc4xx => drivers/net}/4xx_enet.c (100%)

diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile
index adfe13c..463b575 100644
--- a/cpu/ppc4xx/Makefile
+++ b/cpu/ppc4xx/Makefile
@@ -38,7 +38,6 @@ COBJS	+= 44x_spd_ddr2.o
 ifdef CONFIG_PPC4xx_DDR_AUTOCALIBRATION
 COBJS	+= 4xx_ibm_ddr2_autocalib.o
 endif
-COBJS-$(CONFIG_PPC4xx_EMAC) += 4xx_enet.o
 COBJS	+= 4xx_pci.o
 COBJS	+= 4xx_pcie.o
 COBJS	+= bedbug_405.o
diff --git a/cpu/ppc4xx/4xx_enet.c b/drivers/net/4xx_enet.c
similarity index 100%
rename from cpu/ppc4xx/4xx_enet.c
rename to drivers/net/4xx_enet.c
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 439c354..9e4a854 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -54,6 +54,7 @@ COBJS-$(CONFIG_NS8382X) += ns8382x.o
 COBJS-$(CONFIG_DRIVER_NS9750_ETHERNET) += ns9750_eth.o
 COBJS-$(CONFIG_PCNET) += pcnet.o
 COBJS-$(CONFIG_PLB2800_ETHER) += plb2800_eth.o
+COBJS-$(CONFIG_PPC4xx_EMAC) += 4xx_enet.o
 COBJS-$(CONFIG_DRIVER_RTL8019) += rtl8019.o
 COBJS-$(CONFIG_RTL8139) += rtl8139.o
 COBJS-$(CONFIG_RTL8169) += rtl8169.o
-- 
1.5.4.3

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 3/3] Moved initialization of PPC4xx EMAC to cpu_eth_init()
  2008-10-30  5:56 ` [U-Boot] [PATCH 2/3] Moved PPC4xx EMAC driver to drivers/net Ben Warren
@ 2008-10-30  5:56   ` Ben Warren
  0 siblings, 0 replies; 6+ messages in thread
From: Ben Warren @ 2008-10-30  5:56 UTC (permalink / raw)
  To: u-boot

Removed initialization of the driver from net/eth.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
---
 cpu/ppc4xx/cpu.c |   14 ++++++++++++++
 include/netdev.h |    1 +
 net/eth.c        |    4 ----
 3 files changed, 15 insertions(+), 4 deletions(-)

diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index a676b30..1f0b56c 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -36,6 +36,7 @@
 #include <command.h>
 #include <asm/cache.h>
 #include <ppc4xx.h>
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -693,3 +694,16 @@ void reset_4xx_watchdog(void)
 	mtspr(tsr, 0x40000000);
 }
 #endif	/* CONFIG_WATCHDOG */
+
+/*
+ * Initializes on-chip ethernet controllers.
+ * to override, implement board_eth_init()
+ */
+int cpu_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_PPC4xx_EMAC)
+	ppc_4xx_eth_initialize(bis);
+#endif
+	return 0;
+}
+
diff --git a/include/netdev.h b/include/netdev.h
index 45e59b6..751f0da 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -62,6 +62,7 @@ int npe_initialize(bd_t *bis);
 int ns8382x_initialize(bd_t *bis);
 int pcnet_initialize(bd_t *bis);
 int plb2800_eth_initialize(bd_t *bis);
+int ppc_4xx_eth_initialize (bd_t *bis);
 int rtl8139_initialize(bd_t *bis);
 int rtl8169_initialize(bd_t *bis);
 int scc_initialize(bd_t *bis);
diff --git a/net/eth.c b/net/eth.c
index eab5104..b7ef09f 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -41,7 +41,6 @@ int board_eth_init(bd_t *bis) __attribute((weak, alias("__def_eth_init")));
 
 extern int mv6436x_eth_initialize(bd_t *);
 extern int mv6446x_eth_initialize(bd_t *);
-extern int ppc_4xx_eth_initialize(bd_t *);
 
 #ifdef CONFIG_API
 extern void (*push_packet)(volatile void *, int);
@@ -153,9 +152,6 @@ int eth_initialize(bd_t *bis)
 #if defined(CONFIG_DB64460) || defined(CONFIG_P3Mx)
 	mv6446x_eth_initialize(bis);
 #endif
-#if defined(CONFIG_PPC4xx_EMAC)
-	ppc_4xx_eth_initialize(bis);
-#endif
 	if (!eth_devices) {
 		puts ("No ethernet found.\n");
 		show_boot_progress (-64);
-- 
1.5.4.3

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 1/3] Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
  2008-10-30  5:56 [U-Boot] [PATCH 1/3] Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC Ben Warren
  2008-10-30  5:56 ` [U-Boot] [PATCH 2/3] Moved PPC4xx EMAC driver to drivers/net Ben Warren
@ 2008-10-31 10:16 ` Stefan Roese
  2008-10-31 23:03   ` Ben Warren
  1 sibling, 1 reply; 6+ messages in thread
From: Stefan Roese @ 2008-10-31 10:16 UTC (permalink / raw)
  To: u-boot

Hi Ben,

On Thursday 30 October 2008, Ben Warren wrote:
> All in-tree IBM/AMCC PPC4xx boards using the EMAC get this new CONFIG

Looks good, thanks for all this work.

Unfortunately it doesn't apply to my current u-boot-ppc4xx/master branch:

[stefan at kubuntu u-boot-ppc4xx (master)]$ git am -3 -s patches_ben/\[PATCH\ 
1_3\]\ Changed\ PPC4xx\ EMAC\ driver\ to\ require\ CONFIG_PPC4xx_EMAC.mbox
Applying: Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
error: patch failed: net/eth.c:153
error: net/eth.c: patch does not apply
fatal: sha1 information is lacking or useless (net/eth.c).
Repository lacks necessary blobs to fall back on 3-way merge.
Cannot fall back to three-way merge.
Patch failed at 0001.
When you have resolved this problem run "git am -3 --resolved".
If you would prefer to skip this patch, instead run "git am -3 --skip".
To restore the original branch and stop patching run "git am -3 --abort".

Could you please rebase it for me?

And how should we handle these patches? Should they go in via my repository?

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 1/3] Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
  2008-10-31 10:16 ` [U-Boot] [PATCH 1/3] Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC Stefan Roese
@ 2008-10-31 23:03   ` Ben Warren
  2008-11-03  7:53     ` Stefan Roese
  0 siblings, 1 reply; 6+ messages in thread
From: Ben Warren @ 2008-10-31 23:03 UTC (permalink / raw)
  To: u-boot

Hi Stefan,

Stefan Roese wrote:
> Hi Ben,
>
> On Thursday 30 October 2008, Ben Warren wrote:
>   
>> All in-tree IBM/AMCC PPC4xx boards using the EMAC get this new CONFIG
>>     
>
> Looks good, thanks for all this work.
>
> Unfortunately it doesn't apply to my current u-boot-ppc4xx/master branch:
>
> [stefan at kubuntu u-boot-ppc4xx (master)]$ git am -3 -s patches_ben/\[PATCH\ 
> 1_3\]\ Changed\ PPC4xx\ EMAC\ driver\ to\ require\ CONFIG_PPC4xx_EMAC.mbox
> Applying: Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
> error: patch failed: net/eth.c:153
> error: net/eth.c: patch does not apply
> fatal: sha1 information is lacking or useless (net/eth.c).
> Repository lacks necessary blobs to fall back on 3-way merge.
> Cannot fall back to three-way merge.
> Patch failed at 0001.
> When you have resolved this problem run "git am -3 --resolved".
> If you would prefer to skip this patch, instead run "git am -3 --skip".
> To restore the original branch and stop patching run "git am -3 --abort".
>
>   
Yeah, I probably should have grouped all the net/eth.c patches 
together.  If you install the other ones sent at the same time I expect 
it will apply.  I'll re-base this one for you so you can test it.
> Could you please rebase it for me?
>
> And how should we handle these patches? Should they go in via my repository?
>
>   
I was hoping you'd ACK them and I'd apply to -net, since it's but one of 
many controllers I'm messing with.
> Best regards,
> Stefan
>
> =====================================================================
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
> =====================================================================
>   

^ permalink raw reply	[flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 1/3] Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
  2008-10-31 23:03   ` Ben Warren
@ 2008-11-03  7:53     ` Stefan Roese
  0 siblings, 0 replies; 6+ messages in thread
From: Stefan Roese @ 2008-11-03  7:53 UTC (permalink / raw)
  To: u-boot

Hi Ben,

On Saturday 01 November 2008, Ben Warren wrote:
> > Patch failed at 0001.
> > When you have resolved this problem run "git am -3 --resolved".
> > If you would prefer to skip this patch, instead run "git am -3 --skip".
> > To restore the original branch and stop patching run "git am -3 --abort".
>
> Yeah, I probably should have grouped all the net/eth.c patches
> together.  If you install the other ones sent at the same time I expect
> it will apply.  I'll re-base this one for you so you can test it.

Thanks.

> > Could you please rebase it for me?
> >
> > And how should we handle these patches? Should they go in via my
> > repository?
>
> I was hoping you'd ACK them and I'd apply to -net, since it's but one of
> many controllers I'm messing with.

Sure. After I had a chance to test them, I'll send the ACK and you can apply 
them to your -net repository.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 6+ messages in thread
end of thread, other threads:[~2008-11-03  7:53 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-10-30  5:56 [U-Boot] [PATCH 1/3] Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC Ben Warren
2008-10-30  5:56 ` [U-Boot] [PATCH 2/3] Moved PPC4xx EMAC driver to drivers/net Ben Warren
2008-10-30  5:56   ` [U-Boot] [PATCH 3/3] Moved initialization of PPC4xx EMAC to cpu_eth_init() Ben Warren
2008-10-31 10:16 ` [U-Boot] [PATCH 1/3] Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC Stefan Roese
2008-10-31 23:03   ` Ben Warren
2008-11-03  7:53     ` Stefan Roese

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox