From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefan Roese <sr@denx.de>
Date: Tue, 4 Nov 2008 11:46:50 +0100
Subject: [U-Boot] new board SDRAM conf
In-Reply-To: <000901c93e67$5a2a1230$0e7e3690$@com>
References: <001901c93d83$cad90480$608b0d80$@com>
	<200811031602.51216.sr@denx.de>
	<000901c93e67$5a2a1230$0e7e3690$@com>
Message-ID: <200811041146.50321.sr@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Steven,

On Tuesday 04 November 2008, ??? wrote:
> I solved SDRAM problems for your help, when I use CFG_DRAM_TEST , it passed
>
> My bdi2000's configuration  is blows
> WDCR	0x10	0x00000020	;Select SDRAM0_CFG0
> WDCR	0x11	0x34000000	;CFG0: 32bit, PMU disable
> WDCR	0x11	0x84000000	;CFG1: enable SDRA
>
> When I Use BID2000, accessing  SDRAM with Verify, mm command, It works fine
> . I think SDRAM0_CFG first is CFG0, and second is CFG1.
>
> But in board/amcc/mft.c I used  marked code, It's confused me.
> Long int sdram_init()
> {
>
> 	//mtsdram (mem_cfg0, 0x34000000); /* confused me */
> 	//mtsdram (mem_cfg1, 0x84000000);
> 	mtsdram (mem_cfg1, 0x34000000);/* it works fine */
> 	mtsdram (mem_cfg0, 0x84000000);
> }

Not sure if I understand what you are trying to tell me? Did you find a 
problem in the common code? Or is it a problem with your BDI config script?

> I have another problem.
>  cpu/ppc4XX/start.S -> trab_init function has exception error blows LOG
> MESSAGE. When I debug trap_init , use blr code it succefully returned.
> maybe you can point me to the right direction.
>
> trap_init:
> 	lwz	r7, GOT(_start_of_vectors)
> 	lwz	r8, GOT(_end_of_vectors)
>
> 	li	r9, 0x100		/* reset vector always at 0x100 */
>
> 	cmplw	0, r7, r8
> 	bgelr				/* return if r7>=r8 - just in case */
>
> 	mflr	r4			/* save link register		*/
> 1:
> 	lwz	r0, 0(r7)
> 	stw	r0, 0(r9)
> 	addi	r7, r7, 4
> 	addi	r9, r9, 4
> 	cmplw	0, r7, r8
> 	bne	1b
>
>  /*  blr  (in this use blr it works Steven) */

So when you add this "blr" here you can boot successfully to the U-Boot 
prompt? And without it you get the exceptions printed below? That's strange. 
It works on all other known 4xx platforms without problem as far as I know.

Make sure to start "fresh" from the BDI by using "reset run".

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================