[U-Boot] Bus Fault when calling irq_install_handler

[U-Boot] Bus Fault when calling irq_install_handler

[k b]

Hi,

I'm trying to add a interrupt handler. My board is based of taishan 440gx. I'm using external irq0.
the moment i add the interrupt i get

Bus Fault @ 0x00000000, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 0c21ec28 Unknown values in msr
NIP: 00000000 XER: 20000000 LR: 0C345878 REGS: 0c21ec28 TRAP: 0200 DAR: 00000000
MSR: 00000000 EE: 0 PR: 0 FP: 0 ME: 0 IR/DR: 00

GPR00: 00000000 0C21ED18 7FFFFFFF 00000000 0E37EBDB 0C37EBDC 0C361D48 20600000
GPR08: 00000100 0C37EBDC 0C361D44 27BC86AE 0C21EC20 00200000 0C364F00 0C363000
GPR16: 00000000 00000001 00000000 00000001 00001000 0C21ED58 00000000 0C32519C
GPR24: 0C325EC8 FFFFFFF7 0C34586C 00000017 0C362248 0C21EF2C 0C366538 80000000
Call backtrace:
machine check

this happens in
ppc4xx/interrupt.c function irq_install_handler
the moment a call to
mtdcr (uicer, mfdcr (uicer) | (0x80000000>> i));

FYI CONFIG_440 is set and so is CONFIG_4xx and this is not running in compatibility mode.

i checked and rechecked the polarity, trigger register setting they all seem to be correct.

Any pointers would be appreciated.


thanks !


_________________________________________________________________
Store, manage and share up to 5GB with Windows Live SkyDrive.
http://skydrive.live.com/welcome.aspx?provision=1?ocid=TXT_TAGLM_WL_skydrive_102008

[U-Boot] Bus Fault when calling irq_install_handler

[Stefan Roese]

On Wednesday 05 November 2008, k b wrote:
> I'm trying to add a interrupt handler. My board is based of taishan 440gx.
> I'm using external irq0. the moment i add the interrupt i get
>
> Bus Fault @ 0x00000000, fixup 0x00000000
> Machine check in kernel mode.
> Caused by (from msr): regs 0c21ec28 Unknown values in msr
> NIP: 00000000 XER: 20000000 LR: 0C345878 REGS: 0c21ec28 TRAP: 0200 DAR:
> 00000000 MSR: 00000000 EE: 0 PR: 0 FP: 0 ME: 0 IR/DR: 00
>
> GPR00: 00000000 0C21ED18 7FFFFFFF 00000000 0E37EBDB 0C37EBDC 0C361D48
> 20600000 GPR08: 00000100 0C37EBDC 0C361D44 27BC86AE 0C21EC20 00200000
> 0C364F00 0C363000 GPR16: 00000000 00000001 00000000 00000001 00001000
> 0C21ED58 00000000 0C32519C GPR24: 0C325EC8 FFFFFFF7 0C34586C 00000017
> 0C362248 0C21EF2C 0C366538 80000000 Call backtrace:
> machine check
>
> this happens in
> ppc4xx/interrupt.c function irq_install_handler
> the moment a call to
> mtdcr (uicer, mfdcr (uicer) | (0x80000000>> i));

This doesn't seem to be the latest code. Which U-Boot version are you using? I 
re-structured the 4xx interrupt handling a few months ago and now it's 
much "simpler".

> FYI CONFIG_440 is set and so is CONFIG_4xx and this is not running in
> compatibility mode.
>
> i checked and rechecked the polarity, trigger register setting they all
> seem to be correct.

Those are my first thoughts as well.

> Any pointers would be appreciated.

Again, switch to the current U-Boot version and give it another try.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================