From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefan Roese <sr@denx.de>
Date: Tue, 11 Nov 2008 14:12:05 +0100
Subject: [U-Boot] PPC440EP UART 4port enble
In-Reply-To: <001a01c943ed$27ca4f90$775eeeb0$@com>
References: <001701c943c7$9b0f16a0$d12d43e0$@com>
	<200811110824.10776.sr@denx.de>
	<001a01c943ed$27ca4f90$775eeeb0$@com>
Message-ID: <200811111412.05269.sr@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Steven,

On Tuesday 11 November 2008, ??? wrote:
> Thank you for the feedback
>
> I have another question.
> UART 0,1,2,3 works fine.
> UART3 TX works good, but UART RX is not working.
>
> TX data is success, but RX is not working .
> maybe you can point me to the right direction.

No real idea, sorry. I would double-check the GPIO multiplexing configuration 
with the latest 440EP users manual. Perhaps the comments in the 
CONFIG_SYS_4xx_GPIO_TABLE are incorrect.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================