[U-Boot] [PATCH] Bits reversed in ppc4xx.h

[U-Boot] [PATCH] Bits reversed in ppc4xx.h

[Steven A. Falco]

The bits in ppc440.h for the SDR0_DDRCFG register are incorrect.  The
register is numbered in big-endian mode, so for example, the LT2 bit
(bit 23) should be represented as 0x00000100 rather than 0x01000000.

Signed-off-by: Steven A. Falco <sfalco@harris.com>
---

diff --git a/include/ppc440.h b/include/ppc440.h
index c581f1b..520b0d9 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -174,13 +174,13 @@
 #define sdr_ddrdl	0x00e0
 #else
 #define sdr_cfg		0x00e0
-#define SDR_CFG_LT2_MASK          0x01000000 /* Leakage test 2*/
-#define SDR_CFG_64_32BITS_MASK    0x01000000 /* Switch DDR 64 bits or 32 bits */
+#define SDR_CFG_LT2_MASK          0x00000100 /* Leakage test 2*/
+#define SDR_CFG_64_32BITS_MASK    0x00000080 /* Switch DDR 64 bits or 32 bits */
 #define SDR_CFG_32BITS            0x00000000  /* 32 bits */
-#define SDR_CFG_64BITS            0x01000000  /* 64 bits */
-#define SDR_CFG_MC_V2518_MASK     0x02000000 /* Low VDD2518 (2.5 or 1.8V) */
+#define SDR_CFG_64BITS            0x00000080  /* 64 bits */
+#define SDR_CFG_MC_V2518_MASK     0x00000040 /* Low VDD2518 (2.5 or 1.8V) */
 #define SDR_CFG_MC_V25            0x00000000  /* 2.5 V */
-#define SDR_CFG_MC_V18            0x02000000  /* 1.8 V */
+#define SDR_CFG_MC_V18            0x00000040  /* 1.8 V */
 #endif /* !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) */
 #define sdr_ebc		0x0100
 #define sdr_uart0	0x0120	/* UART0 Config */
-- 
1.6.0.2

[U-Boot] [PATCH] Bits reversed in ppc4xx.h

[Stefan Roese]

On Wednesday 19 November 2008, Steven A. Falco wrote:
> The bits in ppc440.h for the SDR0_DDRCFG register are incorrect.  The
> register is numbered in big-endian mode, so for example, the LT2 bit
> (bit 23) should be represented as 0x00000100 rather than 0x01000000.

Those defines are not used anywhere currently. So I would really prefer to 
remove those defines completely. A patch for this would be really 
appreciated. Thanks.

Please note that all 4xx-SDRAM related defines should be placed in 
include/asm-ppc/ppc4xx-sdram.h now.

Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================

[U-Boot] [PATCH] Delete unused definitions for SDR0_DDRCFG from ppc4xx.h

[Steven A. Falco]

The definitions of bits in SDR_CFG are incorrect, and not used within
U-Boot.  Therefore, they can be removed.

Signed-off-by: Steven A. Falco <sfalco@harris.com>
---

As per Stefan's request, here is a patch removing the unused, incorrect
definitions.

Note that the AMCC DDR spreadsheet does calculate a value for the
sdr_cfg register, so I am leaving the "#define sdr_cfg 0x00e0" in
place, to make it easier for boards that have to set this register.

diff --git a/include/ppc440.h b/include/ppc440.h
index c581f1b..a644f99 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -174,13 +174,6 @@
 #define sdr_ddrdl	0x00e0
 #else
 #define sdr_cfg		0x00e0
-#define SDR_CFG_LT2_MASK          0x01000000 /* Leakage test 2*/
-#define SDR_CFG_64_32BITS_MASK    0x01000000 /* Switch DDR 64 bits or 32 bits */
-#define SDR_CFG_32BITS            0x00000000  /* 32 bits */
-#define SDR_CFG_64BITS            0x01000000  /* 64 bits */
-#define SDR_CFG_MC_V2518_MASK     0x02000000 /* Low VDD2518 (2.5 or 1.8V) */
-#define SDR_CFG_MC_V25            0x00000000  /* 2.5 V */
-#define SDR_CFG_MC_V18            0x02000000  /* 1.8 V */
 #endif /* !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) */
 #define sdr_ebc		0x0100
 #define sdr_uart0	0x0120	/* UART0 Config */

[U-Boot] [PATCH] Delete unused definitions for SDR0_DDRCFG from ppc4xx.h

[Stefan Roese]

On Thursday 20 November 2008, Steven A. Falco wrote:
> The definitions of bits in SDR_CFG are incorrect, and not used within
> U-Boot.  Therefore, they can be removed.
>
> Signed-off-by: Steven A. Falco <sfalco@harris.com>
> ---
>
> As per Stefan's request, here is a patch removing the unused, incorrect
> definitions.
>
> Note that the AMCC DDR spreadsheet does calculate a value for the
> sdr_cfg register, so I am leaving the "#define sdr_cfg 0x00e0" in
> place, to make it easier for boards that have to set this register.

Since the register naming is not really correct (SDR0_DDRCFG instead of 
sdr_cfg on 440EPx) I would really like you to remove this define too. And 
sdr_ddrdl too please. If somebody needs them they can be added quickly and 
with the correct naming please (and upper case this time).

Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================

[U-Boot] [PATCH v2] Delete unused definitions for SDR0_DDRCFG from ppc4xx.h

[Steven A. Falco]

The definitions of bits in SDR_CFG are incorrect, and not used within
U-Boot.  Therefore, they can be removed.

The naming of the sdr_ddrdl/sdr_cfg registers do not follow conventions,
and are unused, so they can be removed too.

A definition for SDR0_DDRCFG is added.

Signed-off-by: Steven A. Falco <sfalco@harris.com>
---

As per Stefan's request, here is a patch removing the unused, incorrect
definitions.

Note that the AMCC DDR spreadsheet does calculate a value for the
sdr_cfg register, and I want to use that in a new board design (not yet
ready for submission), so I've added the SDR0_DDRCFG definition.

diff --git a/include/ppc440.h b/include/ppc440.h
index c581f1b..2d64ed6 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -170,18 +170,9 @@
 #define sdr_ecid1	0x0081
 #define sdr_ecid2	0x0082
 #define sdr_jtag	0x00c0
-#if !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX)
-#define sdr_ddrdl	0x00e0
-#else
-#define sdr_cfg		0x00e0
-#define SDR_CFG_LT2_MASK          0x01000000 /* Leakage test 2*/
-#define SDR_CFG_64_32BITS_MASK    0x01000000 /* Switch DDR 64 bits or 32 bits */
-#define SDR_CFG_32BITS            0x00000000  /* 32 bits */
-#define SDR_CFG_64BITS            0x01000000  /* 64 bits */
-#define SDR_CFG_MC_V2518_MASK     0x02000000 /* Low VDD2518 (2.5 or 1.8V) */
-#define SDR_CFG_MC_V25            0x00000000  /* 2.5 V */
-#define SDR_CFG_MC_V18            0x02000000  /* 1.8 V */
-#endif /* !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) */
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define SDR0_DDRCFG	0x00e0
+#endif /* defined(CONFIG_440EPX) || defined(CONFIG_440GRX) */
 #define sdr_ebc		0x0100
 #define sdr_uart0	0x0120	/* UART0 Config */
 #define sdr_uart1	0x0121	/* UART1 Config */

[U-Boot] [PATCH v2] Delete unused definitions for SDR0_DDRCFG from ppc4xx.h

[Stefan Roese]

On Thursday 20 November 2008, Steven A. Falco wrote:
> The definitions of bits in SDR_CFG are incorrect, and not used within
> U-Boot.  Therefore, they can be removed.
>
> The naming of the sdr_ddrdl/sdr_cfg registers do not follow conventions,
> and are unused, so they can be removed too.
>
> A definition for SDR0_DDRCFG is added.
>
> Signed-off-by: Steven A. Falco <sfalco@harris.com>

Applied to 4xx/master. Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================