public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files
Date: Fri, 2 Jan 2009 12:19:47 +0100	[thread overview]
Message-ID: <200901021219.48084.matthias.fuchs@esd-electronics.com> (raw)

Lot's of 405 board config files use CONFIG_SYS_IGNORE_405_UART_ERRATA_59.
Either they define or undef it. Because it's not used in any source
files this patch removes any references to it.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
---
 include/configs/ASH405.h         |    1 -
 include/configs/CATcenter.h      |    1 -
 include/configs/CMS700.h         |    1 -
 include/configs/CPCI2DP.h        |    1 -
 include/configs/CPCI405.h        |    1 -
 include/configs/CPCI4052.h       |    1 -
 include/configs/CPCI405AB.h      |    1 -
 include/configs/CPCI405DT.h      |    1 -
 include/configs/DP405.h          |    1 -
 include/configs/G2000.h          |    1 -
 include/configs/HH405.h          |    1 -
 include/configs/HUB405.h         |    1 -
 include/configs/OCRTC.h          |    1 -
 include/configs/ORSG.h           |    1 -
 include/configs/PCI405.h         |    1 -
 include/configs/PLU405.h         |    1 -
 include/configs/PMC405.h         |    1 -
 include/configs/PPChameleonEVB.h |    1 -
 include/configs/VOH405.h         |    1 -
 include/configs/VOM405.h         |    1 -
 include/configs/WUH405.h         |    1 -
 include/configs/csb272.h         |    1 -
 include/configs/csb472.h         |    1 -
 include/configs/sbc405.h         |    1 -
 24 files changed, 0 insertions(+), 24 deletions(-)

diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h
index a694083..70a720b 100644
--- a/include/configs/ASH405.h
+++ b/include/configs/ASH405.h
@@ -125,7 +125,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
 #undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
 #define CONFIG_SYS_BASE_BAUD	    691200
 #undef	CONFIG_UART1_CONSOLE		/* define for uart1 as console	*/
 
diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h
index a44f3e1..062bbe4 100644
--- a/include/configs/CATcenter.h
+++ b/include/configs/CATcenter.h
@@ -184,7 +184,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
 #undef	CONFIG_SYS_EXT_SERIAL_CLOCK		/* no external serial clock used */
-#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
 #define CONFIG_SYS_BASE_BAUD		691200
 
 /* The following table includes the supported baudrates */
diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h
index d0e2464..02fdd6c 100644
--- a/include/configs/CMS700.h
+++ b/include/configs/CMS700.h
@@ -125,7 +125,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
 #undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
 #define CONFIG_SYS_BASE_BAUD	    691200
 #define	CONFIG_UART1_CONSOLE		/* define for uart1 as console	*/
 
diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h
index 3287734..5c88c47 100644
--- a/include/configs/CPCI2DP.h
+++ b/include/configs/CPCI2DP.h
@@ -112,7 +112,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
 #undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
 #define CONFIG_SYS_BASE_BAUD	    691200
 #define CONFIG_UART1_CONSOLE            /* define for uart1 as console  */
 
diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h
index 89ba139..f032a8d 100644
--- a/include/configs/CPCI405.h
+++ b/include/configs/CPCI405.h
@@ -125,7 +125,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
 #undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
 #define CONFIG_SYS_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h
index d0b4d11..2677cfb 100644
--- a/include/configs/CPCI4052.h
+++ b/include/configs/CPCI4052.h
@@ -134,7 +134,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
 #undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
 #define CONFIG_SYS_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h
index 69c8c6e..aae0d73 100644
--- a/include/configs/CPCI405AB.h
+++ b/include/configs/CPCI405AB.h
@@ -133,7 +133,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
 #undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
 #define CONFIG_SYS_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h
index be8c238..2333208 100644
--- a/include/configs/CPCI405DT.h
+++ b/include/configs/CPCI405DT.h
@@ -135,7 +135,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
 #undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
 #define CONFIG_SYS_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
diff --git a/include/configs/DP405.h b/include/configs/DP405.h
index 884f3fe..187547d 100644
--- a/include/configs/DP405.h
+++ b/include/configs/DP405.h
@@ -117,7 +117,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
 #undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
 #define CONFIG_SYS_BASE_BAUD	    691200
 #undef	CONFIG_UART1_CONSOLE		/* define for uart1 as console	*/
 
diff --git a/include/configs/G2000.h b/include/configs/G2000.h
index d299044..37e1eff 100644
--- a/include/configs/G2000.h
+++ b/include/configs/G2000.h
@@ -152,7 +152,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
 #undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
 #define CONFIG_SYS_BASE_BAUD	    691200
 #undef	CONFIG_UART1_CONSOLE		/* define for uart1 as console	*/
 
diff --git a/include/configs/HH405.h b/include/configs/HH405.h
index 80e59bb..246416e 100644
--- a/include/configs/HH405.h
+++ b/include/configs/HH405.h
@@ -177,7 +177,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
 #undef  CONFIG_SYS_EXT_SERIAL_CLOCK           /* no external serial clock used */
-#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59   /* ignore ppc405gp errata #59   */
 #define CONFIG_SYS_BASE_BAUD       691200
 #define CONFIG_UART1_CONSOLE            /* define for uart1 as console  */
 
diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h
index b3c7046..87e5ddd 100644
--- a/include/configs/HUB405.h
+++ b/include/configs/HUB405.h
@@ -118,7 +118,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
 #undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
 #define CONFIG_SYS_BASE_BAUD	    691200
 #undef	CONFIG_UART1_CONSOLE		/* define for uart1 as console	*/
 
diff --git a/include/configs/OCRTC.h b/include/configs/OCRTC.h
index 32814d4..2591f1d 100644
--- a/include/configs/OCRTC.h
+++ b/include/configs/OCRTC.h
@@ -105,7 +105,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
 #undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
 #define CONFIG_SYS_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
diff --git a/include/configs/ORSG.h b/include/configs/ORSG.h
index 58e9328..13d6e04 100644
--- a/include/configs/ORSG.h
+++ b/include/configs/ORSG.h
@@ -105,7 +105,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
 #undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
 #define CONFIG_SYS_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h
index d0a37d7..4e39799 100644
--- a/include/configs/PCI405.h
+++ b/include/configs/PCI405.h
@@ -111,7 +111,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
 #undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
 #define CONFIG_SYS_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h
index 11ce008..07eeac1 100644
--- a/include/configs/PLU405.h
+++ b/include/configs/PLU405.h
@@ -138,7 +138,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
 #undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
 #define CONFIG_SYS_BASE_BAUD	    691200
 #undef	CONFIG_UART1_CONSOLE		/* define for uart1 as console	*/
 
diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h
index 8d07d77..43e9532 100644
--- a/include/configs/PMC405.h
+++ b/include/configs/PMC405.h
@@ -132,7 +132,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
 #undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
 #define CONFIG_SYS_BASE_BAUD	    691200
 
 /* The following table includes the supported baudrates */
diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index 09a9641..45e5de3 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -192,7 +192,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
 #undef	CONFIG_SYS_EXT_SERIAL_CLOCK		/* no external serial clock used */
-#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
 #define CONFIG_SYS_BASE_BAUD		691200
 
 /* The following table includes the supported baudrates */
diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h
index 10ef620..6edb232 100644
--- a/include/configs/VOH405.h
+++ b/include/configs/VOH405.h
@@ -134,7 +134,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
 #undef  CONFIG_SYS_EXT_SERIAL_CLOCK           /* no external serial clock used */
-#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59   /* ignore ppc405gp errata #59   */
 #define CONFIG_SYS_BASE_BAUD       691200
 #define CONFIG_UART1_CONSOLE            /* define for uart1 as console  */
 
diff --git a/include/configs/VOM405.h b/include/configs/VOM405.h
index 90efc6d..db00c65 100644
--- a/include/configs/VOM405.h
+++ b/include/configs/VOM405.h
@@ -121,7 +121,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
 #undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
 #define CONFIG_SYS_BASE_BAUD	    691200
 #undef	CONFIG_UART1_CONSOLE		/* define for uart1 as console	*/
 
diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h
index 01cdf3a..4ebe33b 100644
--- a/include/configs/WUH405.h
+++ b/include/configs/WUH405.h
@@ -122,7 +122,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
 #undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
 #define CONFIG_SYS_BASE_BAUD	    691200
 #define	CONFIG_UART1_CONSOLE		/* define for uart1 as console	*/
 
diff --git a/include/configs/csb272.h b/include/configs/csb272.h
index 874f2c0..5d3b09a 100644
--- a/include/configs/csb272.h
+++ b/include/configs/csb272.h
@@ -162,7 +162,6 @@
  *
  */
 #define CONFIG_SYS_EXT_SERIAL_CLOCK	3868400	/* use external serial clock */
-#undef  CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59 */
 #undef  CONFIG_SYS_BASE_BAUD
 #define CONFIG_BAUDRATE		38400	/* Default baud rate */
 #define CONFIG_SYS_BAUDRATE_TABLE      \
diff --git a/include/configs/csb472.h b/include/configs/csb472.h
index 2e30e69..a33efde 100644
--- a/include/configs/csb472.h
+++ b/include/configs/csb472.h
@@ -161,7 +161,6 @@
  *
  */
 #undef CONFIG_SYS_EXT_SERIAL_CLOCK		/* use internal serial clock */
-#undef  CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59 */
 #define CONFIG_SYS_BASE_BAUD		691200
 #define CONFIG_BAUDRATE		38400	/* Default baud rate */
 #define CONFIG_SYS_BAUDRATE_TABLE      \
diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h
index c156820..7197aaf 100644
--- a/include/configs/sbc405.h
+++ b/include/configs/sbc405.h
@@ -147,7 +147,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
 #undef CONFIG_SYS_EXT_SERIAL_CLOCK		/* no external serial clock used */
-#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
 #define CONFIG_SYS_BASE_BAUD		691200
 
 /* The following table includes the supported baudrates */
-- 
1.5.6.3

             reply	other threads:[~2009-01-02 11:19 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-01-02 11:19 Matthias Fuchs [this message]
2009-01-26  9:39 ` [U-Boot] [PATCH] ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files Stefan Roese

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200901021219.48084.matthias.fuchs@esd-electronics.com \
    --to=matthias.fuchs@esd-electronics.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox