From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ira Snyder Date: Mon, 12 Jan 2009 13:33:17 -0800 Subject: [U-Boot] [PATCH] MPC8349EMDS: do not setup unused PCI clock outputs in PCI agent mode Message-ID: <20090112213317.GD2364@ovro.caltech.edu> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de When running in PCI agent mode, the PCI_CLK_OUT signals are not used, so do not enable them. See the MPC8349EA Reference Manual, Section 4.4.2 "Clocking in PCI Agent Mode". Signed-off-by: Ira W. Snyder --- board/freescale/mpc8349emds/pci.c | 7 ------- 1 files changed, 0 insertions(+), 7 deletions(-) diff --git a/board/freescale/mpc8349emds/pci.c b/board/freescale/mpc8349emds/pci.c index ad7bf5d..af0b1da 100644 --- a/board/freescale/mpc8349emds/pci.c +++ b/board/freescale/mpc8349emds/pci.c @@ -171,15 +171,10 @@ void pci_init_board(void) void pci_init_board(void) { volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR; - volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; volatile law83xx_t *pci_law = immr->sysconf.pcilaw; volatile pcictrl83xx_t *pci_ctrl = &immr->pci_ctrl[0]; struct pci_region *reg[] = { pci1_regions }; - /* Enable all 8 PCI_CLK_OUTPUTS */ - clk->occr = 0xff000000; - udelay(2000); - /* Configure PCI Local Access Windows */ pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR; pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G; @@ -187,8 +182,6 @@ void pci_init_board(void) pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR; pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_4M; - udelay(2000); - mpc83xx_pci_init(1, reg, 0); /* Configure PCI Inbound Translation Windows (3 1MB windows) */ -- 1.5.4.3