From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Roese Date: Wed, 14 Jan 2009 11:36:45 +0100 Subject: [U-Boot] [PATCH V2] ppc4xx: Enable auto RS485 mode on PLU405 boards In-Reply-To: <200901021216.35930.matthias.fuchs@esd-electronics.com> References: <200812281923.45981.mfuchs@ma-fu.de> <200901021216.35930.matthias.fuchs@esd-electronics.com> Message-ID: <200901141136.45312.sr@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Friday 02 January 2009, Matthias Fuchs wrote: > 2nd version of this patch eliminates a whitespace issue :-( Please put such statements below the "---" next time. They don't really should be included in the commit text. And it's always helpful to have a patch revision description (changes in ver1: ... changes in ver2: ... etc) below the "---". I removed this line for now so no need to resend now. > This patch turns on the auto RS485 mode in the 2nd external > uart on PLU405 boards. This is a special mode of the used > Exar XR16C2850 uart. Because these boards only have a 485 physical > layer connected it's a good idea to turn it on by default. > > Signed-off-by: Matthias Fuchs Added to u-boot/master. Thanks. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================