[U-Boot] [PATCH 07/11] flash/cfi_flash: Use virtual sector start address, not phys

[Stefan Roese <sr@denx.de>]

On Wednesday 14 January 2009, Kumar Gala wrote:
> On Dec 3, 2008, at 11:04 PM, Becky Bruce wrote:
> > include/flash.h was commented to say that the address in
> > flash_info->start was a physical address.  However, from u-boot's
> > point of view, and looking at most flash code, it makes more
> > sense for this to be a virtual address.  So I corrected the
> > comment to indicate that this was a virtual address.
> >
> > The only flash driver that was actually treating the address
> > as physical was the mtd/cfi_flash driver.  However, this code
> > was using it inconsistently as it actually directly dereferenced
> > the "start" element, while it used map_physmem to get a
> > virtual address in other places.  I changed this driver so
> > that the code which initializes the info->start field calls
> > map_physmem to get a virtual address, eliminating the need for
> > further map_physmem calls.  The code is now consistent.
> >
> > The *only* place a physical address should be used is when defining
> > the
> > flash banks list that is used to initialize the flash_info struct.  I
> > have fixed the one platform that was impacted by this change
> > (MPC8641D).
> >
> > Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
> > ---
> > drivers/mtd/cfi_flash.c       |   53 +++++++++++++++++
> > +----------------------
> > include/configs/MPC8641HPCN.h |    2 +-
> > include/flash.h               |    2 +-
> > 3 files changed, 26 insertions(+), 31 deletions(-)
>
> Stefan,
>
> Have you reviewed this.

No, I must have forgotten about it. Thanks for reminding me. I'll have a 
closer look at it hopefully by tomorrow.

BTW: This patch needs to be split up in the CFI part and the MPC8641HPCN part.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================