From mboxrd@z Thu Jan  1 00:00:00 1970
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Sat, 17 Jan 2009 01:46:47 +0300
Subject: [U-Boot] Problems upgrading NAND
In-Reply-To: <d970ff420901160802q16f7e472n164a80e2610e239c@mail.gmail.com>
References: <d970ff420901150846o6a6960b3y33b3332650f95bfb@mail.gmail.com>
	<20090115182340.GB11929@ld0162-tx32.am.freescale.net>
	<d970ff420901160802q16f7e472n164a80e2610e239c@mail.gmail.com>
Message-ID: <20090116224647.GA18874@oksana.dev.rtsoft.ru>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Fri, Jan 16, 2009 at 02:02:26PM -0200, Alemao wrote:
> > I'm guessing that 1.2.0 was a BSP u-boot, that was not upstream.  I don't
> > think upstream 1.2.0 had UPM NAND support.
> 
> You are right, there were no UPM support on U-boot-1.2.0.
> I used patches sended by Anton from here:
> 
> http://www.nabble.com/-PATCH-v2-0-5--mpc83xx%3A-MPC8360E-RDK-related-patches-td14717360.html#a14717487

There were known issues with this version (it only worked for the
small page NANDs, IIRC).

This is already fixed in the upstream U-Boot, via this patch set:

http://www.nabble.com/-PATCH-v3-0-2--NAND-FSL-UPM-driver-update-td17667335.html

Thanks,

-- 
Anton Vorontsov
email: cbouatmailru at gmail.com
irc://irc.freenode.net/bd2