From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefan Roese <sr@denx.de>
Date: Mon, 19 Jan 2009 17:12:32 +0100
Subject: [U-Boot] [RFC/PATCH 1/4] Enable multi chip support in the NAND
	layer
In-Reply-To: <4970C0C6.2090208@grandegger.com>
References: <4964FA39.3010902@grandegger.com>
	<20090116082201.9BC0E832E425@gemini.denx.de>
	<4970C0C6.2090208@grandegger.com>
Message-ID: <200901191712.32955.sr@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Wolfgang G.,

On Friday 16 January 2009, Wolfgang Grandegger wrote:
> > So we should change the default setting to 1, and change it only where
> > needed.
>
> Actually, none of the boards use multi-chip support (NAND_MAX_CHIPS >
> 1). The bamboo and the DU440 define
>
>   #define NAND_MAX_CHIPS          CONFIG_SYS_MAX_NAND_DEVICE
>
> but that's bogus and did not work yet anyhow.

Not sure what you mean by this. Bamboo has 2 NAND chips and U-Boot can access 
both chips.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================