From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Roese Date: Thu, 29 Jan 2009 16:47:05 +0100 Subject: [U-Boot] Enabling POST for canyonlands board In-Reply-To: <174230991E95D743B0C91DF471EF44E8434387BC0F@MTW02MSG02.mindtree.com> References: <174230991E95D743B0C91DF471EF44E8434387BC0F@MTW02MSG02.mindtree.com> Message-ID: <200901291647.05726.sr@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Afzal, On Thursday 29 January 2009, Afzal Nadirshah wrote: > Is the Power On Self Test enabled for the canyonlands board? A quick look at the canyonlands config header shows that it's not enabled. > What I > want to know is whether I need to set any macro while compiling, to enable > POST. Yes. I suggest you take a look at the kilauea.h header. Here POST is enabled by default. > I saw that there are some hot keys defined to start POST for certain > boards. Is there anything defined like that for canyonlands board.How do I > start the POST. Some POST tests are run always after poweron, and some (longer) tests are only run under certain conditions. doc/README.POST should give you an overview here. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================