[U-Boot] [PATCH] ppc4xx: Only fixup opb attached UARTs

[U-Boot] [PATCH] ppc4xx: Only fixup opb attached UARTs

[Matthias Fuchs]

This patch updates the fdt UART clock fixup code to
only touch CPU internal UARTs on 4xx systems.
Only these UARTs are definitely clocked by gd->uart_clk.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
---
 cpu/ppc4xx/fdt.c |   24 ++++++++++++++++++++++--
 1 files changed, 22 insertions(+), 2 deletions(-)

diff --git a/cpu/ppc4xx/fdt.c b/cpu/ppc4xx/fdt.c
index c55e1cf..ba5c120 100644
--- a/cpu/ppc4xx/fdt.c
+++ b/cpu/ppc4xx/fdt.c
@@ -113,6 +113,7 @@ void fdt_pcie_setup(void *blob)
 void ft_cpu_setup(void *blob, bd_t *bd)
 {
 	sys_info_t sys_info;
+	int off, ndepth = 0;
 
 	get_sys_info(&sys_info);
 
@@ -133,9 +134,28 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 	fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
 
 	/*
-	 * Setup all baudrates for the UARTs
+	 * Fixup all UART clocks for CPU internal UARTs
+	 * (only these UARTs are definitely clocked by gd->uart_clk)
+	 *
+	 * These UARTs are direct childs of /plb/opb. This code
+	 * does not touch any UARTs that are connected to the ebc.
 	 */
-	do_fixup_by_compat_u32(blob, "ns16550", "clock-frequency", gd->uart_clk, 1);
+	off = fdt_path_offset(blob, "/plb/opb");
+	while ((off = fdt_next_node(blob, off, &ndepth)) >= 0) {
+		/*
+		 * process all sub nodes and stop when we are back
+		 * at the starting depth
+		 */
+		if (ndepth <= 0)
+			break;
+
+		/* only update direct childs */
+		if ((ndepth == 1) &&
+		    (fdt_node_check_compatible(blob, off, "ns16550") == 0))
+			fdt_setprop(blob, off,
+				    "clock-frequency",
+				    (void*)&(gd->uart_clk), 4);
+	}
 
 	/*
 	 * Fixup all ethernet nodes
-- 
1.5.6.3

[U-Boot] [PATCH] ppc4xx: Only fixup opb attached UARTs

[Stefan Roese]

On Tuesday 03 February 2009, Matthias Fuchs wrote:
> This patch updates the fdt UART clock fixup code to
> only touch CPU internal UARTs on 4xx systems.
> Only these UARTs are definitely clocked by gd->uart_clk.

Applied to ppc4xx/master. Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================