From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Roese Date: Mon, 16 Feb 2009 10:15:49 +0100 Subject: [U-Boot] tftp not working In-Reply-To: <174230991E95D743B0C91DF471EF44E8434329C60E@MTW02MSG02.mindtree.com> References: <174230991E95D743B0C91DF471EF44E8434329C609@MTW02MSG02.mindtree.com> <200902160942.55749.sr@denx.de> <174230991E95D743B0C91DF471EF44E8434329C60E@MTW02MSG02.mindtree.com> Message-ID: <200902161015.50065.sr@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Monday 16 February 2009, Afzal Nadirshah wrote: > I did as suggested by you. I also set the serverip as well as ipaddr. Now > when i do a tftp 100000 u-boot-nand.bin, i get the following : > > => tftp 100000 u-boot-nand.bin > Waiting for PHY auto negotiation to complete...... TIMEOUT ! !!! > done > ENET Speed is 10 Mbps - HALF duplex connection (EMAC0) > Using ppc_4xx_eth0 device > TFTP from server 172.22.68.33; our IP address is 172.22.68.36 > Filename 'u-boot-nand.bin'. > Load address: 0x100000 > Loading: * > > It hangs at this point Your board doesn't have a correct ethernet link. Is this really the original Canyonlands board? Is the correct ethernet port connected? Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================