From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfgang Denk Date: Tue, 17 Feb 2009 12:51:03 +0100 Subject: [U-Boot] U-BOOT MPC8560 based board : No prints after relocation In-Reply-To: <20090217112225.M67044@cdotd.ernet.in> References: <20090217112225.M67044@cdotd.ernet.in> Message-ID: <20090217115103.98CF7832E893@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear "Deepak Gaur", In message <20090217112225.M67044@cdotd.ernet.in> you wrote: > > I am porting U-BOOT on an MPC8560ADS like custom board with 1GB DDR SDRAM. My minicom > port is connected to SCC1 of MPC8560 on 9600 8N1 baud rate. After relocation of U-BOOT > in RAM > prints stops coming See U-Boot FAQ "U-Boot crashes after relocation to RAM" Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "'Tis true, 'tis pity, and pity 'tis 'tis true." - Poloniouius, in Willie the Shake's _Hamlet, Prince of Darkness_