[U-Boot] PCI-E problems on Kilauea board

[Stefan Roese <sr@denx.de>]

On Tuesday 17 February 2009, Felix Radensky wrote:
> >> 2. Another problem is that in bootstrap configuration B (CPU - 333 Mhz,
> >> PLB 166MHz)
> >>     PCI-E cards are not recognized in any slot. This happens with all
> >> u-boot versions I've
> >>     tested. Linux also does not recognize PCI-E cards. Kilauea board
> >> manual says that PCI
> >>     clock is determined by CPLD. Could it be CPLD/FPGA bug ?
> >
> > Is bootstrap option C working?
>
> No, C doesn't work either. The card I'm testing with is Intel Gigabit
> Ethernet adapter (PRO/1000 PT 1x)

Perhaps its only working with the I2C bootstrap settings. Could be that one 
(or more) register values are configured via the I2C bootstrap EEPROM 
compared to the hardwired bootstrap option. Please check the users manual and 
compare the register settings of I2C bootstrap option H to option B or C.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================