From mboxrd@z Thu Jan  1 00:00:00 1970
From: Anatolij Gustschin <agust@denx.de>
Date: Mon, 23 Feb 2009 13:20:12 +0100
Subject: [U-Boot] [PATCH 9/9 v3] ARM: add an "eet" variant of the
	imx31_phycore board
In-Reply-To: <Pine.LNX.4.64.0902061034420.4970@axis700.grange>
References: <Pine.LNX.4.64.0902041532100.6279@axis700.grange>
	<Pine.LNX.4.64.0902061004010.4970@axis700.grange>
	<Pine.LNX.4.64.0902061034420.4970@axis700.grange>
Message-ID: <200902231320.12843.agust@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Guennadi,

On Friday 06 February 2009 10:38:01 am Guennadi Liakhovetski wrote:
> The "eet" variant of the imx31_phycore board has an OLED display, using a
> s6e63d6 display controller on the first SPI interface, using GPIO57 as a
> chip-select for it. With this configuration you can display 256 colour BMP
> images in 16-bit RGB (RGB565) LCD mode.
>
> Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
> ---
>
> Changes since v1: adjusted to reflect changes in earlier patches: add .id
> field initialisation, configuration parameter renamed to CONFIG_S6E63D6.
> Changes since v2: fixed the left-over CONFIG_DISPLAY_S6E63D6 parameter.

can you please address comments from Jean-Christophe to this 9/9 v3 patch?
I'm steel waiting for ACK from Jean-Christophe for 1/9 v4,  2/9 v4 and 9/9 v3
patches from this series.

Best regards,
Anatolij