From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefan Roese <sr@denx.de>
Date: Mon, 9 Mar 2009 09:30:01 +0100
Subject: [U-Boot] [PATCH] CFI: geometry reversal for STMicro M29W320DT
In-Reply-To: <49B14FC2.8090505@RuggedCom.com>
References: <49B13CB1.8010704@RuggedCom.com> <200903061627.24200.sr@denx.de>
	<49B14FC2.8090505@RuggedCom.com>
Message-ID: <200903090930.01771.sr@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Friday 06 March 2009, Richard Retanubun wrote:
> >> My baseline is 2009.03-rc1. If there are STMicro/Numonyx guys on
> >> this mailing list, can you help provide a more 'generic' way of
> >> detection? this way the exception list does not have to grow a lot.
> >
> > Did you take a look at the Linux driver to see how this is handled there?
> > Maybe they have a more "generic" solution...
>
> Hi Stefan,
>
> Thanks for the comments. I took a quick look around /drivers/mtd,
> but can't find a similar geometry reversal.
>
> Unfortunately, I found this in:
>
> /driver/mtd/chips/cfi_cmdset_0001.c
> [snip]
> 	{ CFI_MFR_ST, 0x00ba, /* M28W320CT */ fixup_st_m28w320ct, NULL },
> 	{ CFI_MFR_ST, 0x00bb, /* M28W320CB */ fixup_st_m28w320cb, NULL },
> [/snip]
>
> By no means am I a CFI expert, but my impression is,
> if there has to be a part number specific fixup function for any reason,
> then it is a good indication that there are just some part specific
> peculiarity.

Right.

> What utilities exist in Linux-world to do the equivalent of "flinfo" in
> u-boot, just so I can see if Linux has a more generic way.

At this level you really need to "read" the code and/or use the embedded debug 
output (if available) or add some new code to see what's going on.

> And just in case it matters, our board with these flash is MMU-less,
> so if there is a different tool for uCLinux that will help too :)

I don't think that uCLinux has different "tools" here.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================