From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefan Roese <sr@denx.de>
Date: Wed, 11 Mar 2009 15:05:56 +0100
Subject: [U-Boot] PCI-E problems on Kilauea board
In-Reply-To: <49B7BF33.5000403@embedded-sol.com>
References: <499997E2.10303@embedded-sol.com> <200903111322.50949.sr@denx.de>
	<49B7BF33.5000403@embedded-sol.com>
Message-ID: <200903111505.56458.sr@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Wednesday 11 March 2009, Felix Radensky wrote:
> > The PCIe device used here is the Intel PRO/1000 PT Desktop card.
> >
> > Which Kilauea board revision are you using? And do you see the same
> > problems with other PCIe cards as well?
>
> I use Kilauea revision 1.2 and exactly the same network card as you.

I'm using the same board revision too.

> The problem is still here.

Strange.

> It doesn't happen with other PCI-E card I have 
> (10G Ethernet adapter).
>
> I have a feeling that 2 Kilauea boards of the same revision may sometimes
> exhibit different behavior with the same version of u-boot.

This could be the case. Do you have another Kilauea board?

> For example, 
> with u-boot 2008.10-rc2 that comes with AMCC CD, memory was properly
> detected on one board in bootstrap option B but not detected on the
> another. I had to recompile u-boot and disable autocalibration to make
> things work on this board.

This is a different issue. The DDR2 autocalibration had a bug. Because of this 
some boards could boot just fine with autocalibration enabled and some not. 
This bug should be fixed now. In the latest U-Boot version autocalibration is 
enabled again for Kilauea and seems to work now. At least I didn't notice any 
problems anymore. Please give it a try and let me know if this doesn't work 
for you.

But again, this is a different issue. Not sure how to help you with the PCIe 
detection problem.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================