[U-Boot] About PCI of U-BOOT of CANYONLANDS

[Stefan Roese <sr@denx.de>]

On Wednesday 18 March 2009, Felix Radensky wrote:
> >> PCI:   Bus Dev VenId DevId Class Int
> >>          00  06  1002  5960  0300  ff
> >>          00  06  1002  5940  0380  ff
> >> PCIE1: link is not up.
> >> PCIE1: initialization as root-complex failed
> >> Video: ATI Radeon video card (1002, 5960) found @(0:6:0)
> >> Machine Check Exception.
> >> Caused by (from msr): regs 1fe3ac30 Data Read PLB Error
> >> NIP: 1FF82B10 XER: 00000000 LR: 1FF82AE8 REGS: 1fe3ac30 TRAP: 0200 DEAR:
> >> 70600027
> >> MSR: 00021000 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
> >
> > Anatolij, do you have any ideas what's going wrong here?
> >
> > Thanks.
>
> Looks like you have ATI cards in both PCI-E slots and also SATA
> enabled. This cannot work, as SATA shares lines with x1 PCI-E
> slot on Canyonlands.  Use J6 jumper to enable both PCI-E slots.

No, it's PCI and not PCIe.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================